what fuse would this be....
06-04-2003, 06:57 PM
#1
BOOM goes the dynamite!
Thread Starter
what fuse would this be....
i was driving and my speedo and tach died. then i realized that my turn signals don't work. don't even blink. my hazards (4-ways) don't work either. but the dash still lights up, the corners, headlights, and tail lights still work. but i can't figured what fuse blew (i'm guessing it's a fuse somewhere). anyone know? thanks.
06-04-2003, 08:21 PM
#3
I had same happen to me......usually its the wiring behind the gauges....if not you blew a fuse under your dash....you should have the chart that tells you......if not check each one and find the one(s) that blew.
06-04-2003, 08:27 PM
#4
BOOM goes the dynamite!
Thread Starter
well, i found the hazard fuse which was blown. that fixed my hazards. but the gauge cluster still doesn't work (along with the clock). but the radio works. and when i turn my key to "on" it doesn't do the long beeps, just the short ones. any more ideas?
06-04-2003, 10:19 PM
#7
BOOM goes the dynamite!
Thread Starter
Originally posted by fish
this will sound stupid but check the fuse for the reverse lights i blew that fuse and the same problem you are having happened to me.
this will sound stupid but check the fuse for the reverse lights i blew that fuse and the same problem you are having happened to me.
06-05-2003, 01:31 PM
#10
BOOM goes the dynamite!
Thread Starter
well, i went and look more today. i think it was a combo of things. the reverse lights fuse was blown (though, when i first checked it, it wasn't). so i think it blew after i fixed the hazard lights fuse. i :dunno: i'm running out of a fuses, so i need to go buy some more. but everything works (for now). thanks. 