1990-93 Distributor sub-housing replacement
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Lavale, Maryland
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1990-93 Distributor sub-housing replacement
I have a 1993 Accord and have noticed the squeal in the distributor area signifying the need to replace the sub-housing assembly. How difficult of a job is it? Can someone give me some detailed instructions on how to do it as well as problems which could occur during the assembly process? Thank you.
#2
what do you mean sub housing?
usually you have to replace teh whole unit if you are buying froma dealer or rebuilt.
anyway to replace it you remove 3 i think 12 mm bolts pull it off and then slide the new one on, there is only one way it goes in easily.
usually you have to replace teh whole unit if you are buying froma dealer or rebuilt.
anyway to replace it you remove 3 i think 12 mm bolts pull it off and then slide the new one on, there is only one way it goes in easily.
#4
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Lavale, Maryland
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Blackchrome, Thanks for the picture. #4 is the sub housing assembly. I did purchase the correct one for my 1993. V4lu3s makes it sound so simple. A friend of mine said he thinks you have to align the pistons and valves at top dead center(TDC). Is this true? How is this done? Do any of the other parts in your picture need replacement when this distributor housing is replaced? All comments appreciated. Thank you.
#5
Originally posted by DanG
Blackchrome, Thanks for the picture. #4 is the sub housing assembly. I did purchase the correct one for my 1993. V4lu3s makes it sound so simple. A friend of mine said he thinks you have to align the pistons and valves at top dead center(TDC). Is this true? How is this done? Do any of the other parts in your picture need replacement when this distributor housing is replaced? All comments appreciated. Thank you.
Blackchrome, Thanks for the picture. #4 is the sub housing assembly. I did purchase the correct one for my 1993. V4lu3s makes it sound so simple. A friend of mine said he thinks you have to align the pistons and valves at top dead center(TDC). Is this true? How is this done? Do any of the other parts in your picture need replacement when this distributor housing is replaced? All comments appreciated. Thank you.
However, i do know that when you replace the sub housing, you don't need to replace any other parts, unless you want to replace your cap & rotor.
#6
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Lavale, Maryland
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanks alot guys, I'll let you know how it turned out. I appreciate all the comments and help with this project. Great group of guys. Much appreciated.