Headers
#6
Fight Rice
Join Date: Jun 2002
Location: cincy, ohio
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
yes, get the greddy. it is very good quality and holds up very well. it is very easy to install, and helps to have two sets of hands (another person to help if you didn't understand that). you use the stock gasket that goes between the header and the block, and it bolts up nicely to the piping right before the O2 sensor so you dont have to worry about rewiring or relocating the O2 sensor. it stays right where it is now. as far as HP gains, dont expect a great deal b/c the EX already has a decent header. you will feel some gains though.
#7
Senior Member
Thread Starter
Join Date: Apr 2003
Location: North Kingstown, RI
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
#8
Former H22 Accord Owner
Join Date: Mar 2002
Location: NH
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Funkwheat
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2414562296 <--- What about this?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2414562296 <--- What about this?
a nickel chrome finish says it all. a finish made to look like SS, thrown on mild steel which when that flakes off will rust like hell. at least CC mild steel won't flake off.
#9
Originally posted by AccordSleeper
^the greddy has larger primaries, full SS including the flanges unlike DC, and is higher quality than DC.
^the greddy has larger primaries, full SS including the flanges unlike DC, and is higher quality than DC.