Cranks but won't turnover
03-27-2003, 10:20 PM
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Where the buffalos roam
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Cranks but won't turnover
My car will not start.
I drove it on Friday....not Saturday...tried to start it on Sunday and no such luck.
I have a 95 LS Integra Supercharged.....FUX
I drove it on Friday....not Saturday...tried to start it on Sunday and no such luck.
I have a 95 LS Integra Supercharged.....FUX
03-28-2003, 04:04 AM
#2
The deer had to die!
Join Date: Jun 2002
Location: Fussa, Japan
Posts: 39,835
Likes: 0
Received 0 Likes
on
0 Posts
does it make any weird sounds while cranking? sounds like the plugs wont fire. check your plugs, see if they spark, check your distributor cap as well. check the rotor inside for any wear or damage.
do you have an aftermarket ignition system (ie. MSD SCI, etc)?
do you have an aftermarket ignition system (ie. MSD SCI, etc)?
h:
03-28-2003, 10:09 AM
#6
Registered User
Thread Starter
Join Date: Jan 2003
Location: Where the buffalos roam
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
it's a newer battery (1 yr old), it was cold out on friday and saturday night....but still.
No after market ignition....i hate that shit...just more trouble
No after market ignition....i hate that shit...just more trouble
03-28-2003, 10:22 AM
#7
Senior Member
Join Date: Aug 2002
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
if its cranking and not starting its not the battery. mine was doing the same thing a while ago. one day it ran perfect the next day it wouldnt start. turned out to be the ignition coil. do you have any friends with integras? just borrow thier ignition coil and ignitor and see if your car starts.
hth
hth
03-28-2003, 04:35 PM
#10
Senior Member
Join Date: Jun 2002
Location: York, Pa
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
I would start with the plugs and wires to make sure that the spark is getting to the engine. Then move into the cap, rotor, and coil. You can test these with a multimeter but I don't know what the reading should be maybe someone with a manual can help with that. If this is all o.k. then check the ignitor.