NEED help please! Acura CL rear brake
12-14-2009, 07:31 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: ma
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
NEED help please! Acura CL rear brake
I just removed both rear calipers and rotors in a 1997 Acura cl 2.0 The question I have is the "squeal bracket" (metal "bracket" that connects with the rotor so you will hear when you need to replace) was put in two different ways. One side was put on the inside (towards the exhaust) one was put on the "street side" of the car. Should the metal bracket go inward or outward? Thanks for your help, my guess is inside to make contact with the rotor.
THANKS in advance
here is a image of the pads.
http://www.autoguide.net/apf/images/...8915840mrh.jpg
THANKS in advance
here is a image of the pads.
http://www.autoguide.net/apf/images/...8915840mrh.jpg
12-29-2009, 12:56 AM
#2
Lord Vader Moderator
Join Date: May 1999
Location: Bay Area, CA
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
The brake wear indicator will need to point towards the brake rotor.
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.