Mugen Pro II Kit - Reach In' Back
07-29-2009, 04:10 PM
#1
Administrator ☂
Thread Starter
Mugen Pro II Kit - Reach In' Back
Mugen Pro II Kit - Reach In' Back
Honda Tuning editor Rodrez talks about Mugen and their Pro II Kit racing kit.Mugen Pro II Kit
If you had to name one group as the king of Honda aftermarket engineering and performance, it would probably be Mugen. And if you were asked to name one thing that influenced the knock-off industry more than any other item, it would probably be the CRX Pro II kit. This trend setting kit featured 6 body pieces made specifically for the 88-89, and 90-91 models, and managed to revolutionize the Honda aftermarket aero industry. Expertly laid high quality fiberglass offered an OEM-quality fit. The side skirt and door caps utilized stock mounting holes, and featured indentions on the exterior of both sides for the authentic Mugen badge. The rear bumper was fitted with its own bumper support that bolted to the chassis just like the factory piece. Also notable was the under-tray that ran along the length of the rear bumper and over the exhaust ends. An inset portion at the bottom of the bumper could be fitted with the included honeycomb-style mesh screen that mounted from the outside of the bumper.
Photo Gallery: Mugen Pro II Kit - Editor Rodrez - Honda Tuning Magazine
Photo Gallery: Mugen Pro II Kit - Editor Rodrez - Honda Tuning Magazine
Read More | Digg It | Add to del.icio.us
More...
Honda Tuning editor Rodrez talks about Mugen and their Pro II Kit racing kit.Mugen Pro II Kit
If you had to name one group as the king of Honda aftermarket engineering and performance, it would probably be Mugen. And if you were asked to name one thing that influenced the knock-off industry more than any other item, it would probably be the CRX Pro II kit. This trend setting kit featured 6 body pieces made specifically for the 88-89, and 90-91 models, and managed to revolutionize the Honda aftermarket aero industry. Expertly laid high quality fiberglass offered an OEM-quality fit. The side skirt and door caps utilized stock mounting holes, and featured indentions on the exterior of both sides for the authentic Mugen badge. The rear bumper was fitted with its own bumper support that bolted to the chassis just like the factory piece. Also notable was the under-tray that ran along the length of the rear bumper and over the exhaust ends. An inset portion at the bottom of the bumper could be fitted with the included honeycomb-style mesh screen that mounted from the outside of the bumper.
Photo Gallery: Mugen Pro II Kit - Editor Rodrez - Honda Tuning Magazine
Photo Gallery: Mugen Pro II Kit - Editor Rodrez - Honda Tuning Magazine
Read More | Digg It | Add to del.icio.us
More...
