Rim offset Q
12-09-2002, 01:25 PM
#4
のんびり～(´ε｀)
+35 will put te top of the wheel pretty close to the fender. You want at least +40(+42 and up would be all the better) with a 7" wide rim and anything more than a moderate drop.
12-09-2002, 05:50 PM
#5
Senior Member
Join Date: Mar 2002
Location: Near Albany NY
Posts: 4,943
Likes: 0
Received 0 Likes
on
0 Posts
i have 17x7 with a 40mm offset with a 1.75 inch drop. I had rubbing issues in the rear and the front on bumps of anykind. After i got my fender lips cut out and rolled i have very few rubbing problems. BTW i have perfect camber in the front and slightly negative in the rear
