crankshaft position sensor problem help!!!
06-10-2008, 07:43 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2008
Location: NC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
crankshaft position sensor problem help!!!
I have 96 acura TL, I just change out the spark plugs then 2 days later then
engine is stalling and can't rev over 3000 rpm the engine light is on, so i
took it to autozone to pull up the code. then it pull up 6 codes one of them
is po335 (crankshaft position sensor) so do i have to change out the sensor?
but its $350 for the sensor!!
engine is stalling and can't rev over 3000 rpm the engine light is on, so i
took it to autozone to pull up the code. then it pull up 6 codes one of them
is po335 (crankshaft position sensor) so do i have to change out the sensor?
but its $350 for the sensor!!
06-10-2008, 11:23 PM
#2
Lord Vader Moderator
Join Date: May 1999
Location: Bay Area, CA
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
What are the other 5 codes for?
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
06-12-2008, 12:27 AM
#4
Lord Vader Moderator
Join Date: May 1999
Location: Bay Area, CA
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
But do you know what they read? You mentioned one is for crankshaft position sensor, what about the other 5?
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
06-15-2008, 07:23 AM
#6
Junior Member
Thread Starter
Join Date: Jun 2008
Location: NC
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
crankshaft position sensor replacement help!!
Im having problems with my 96 TL, I have to replace the crankshaft position sensor. does anyone know where is it? and how to replace it?
06-15-2008, 11:53 AM
#7
Lord Vader Moderator
Join Date: May 1999
Location: Bay Area, CA
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Before changing the sensor, you need to find out what the other 5 codes are for. 99% of the time, it is NOT the crankshaft position sensor and is something else. You can change it if you want, afterall, it is your money.
__________________
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.
Honda-Acura.net Vigor/TL/CL Forum Moderator.
Comptech Icebox, Headers, Exhaust, Lowering Springs and Sway Bars. Mugen front grille. Inspire tailamps. MOMO Sport 18 X 7.5 +42 offset. Axxis Metal Master front/rear pad. 2 Polk/MOMO 10" subs, Orion Xtreme 500.4 amplifier and Alpine CD changer.