It's all clear as day now! (VTEC wires)
#1
warm butter on toast
Thread Starter
Join Date: Jan 2005
Location: The boonies, CT
Posts: 6,485
Likes: 0
Received 0 Likes
on
0 Posts
It's all clear as day now! (VTEC wires)
Ok, well as some of you know, I was a rediculous pain in the ass about the vtec wires because I couldn't find a tutorial with pics. Well I found this somewhere on the forums http://hondaswap.com/forums/index.php?showtopic=41608 . I have the blue/black ran, the green yellow ran, and the black grounded. Is there any other wires I need to run?
#3
warm butter on toast
Thread Starter
Join Date: Jan 2005
Location: The boonies, CT
Posts: 6,485
Likes: 0
Received 0 Likes
on
0 Posts
Nah, not yet. I think my stablizer bar is messed up, it doesn't mount flush, so I have to pull on it to fit on the mount, then it pulls my whole shifter up forward. Then I need to bleed my clutch cuz the damn thing is stuck to the ground. But is that for the wires?
#6
Your Powder Coater
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes
on
0 Posts
start the damn car & make sure it runs then shut it back off!
LOL idk how u wait this long.. i was way to anxious to find out if mine was going to run or not.. i started mine before i had ANYthing hooked up! lol ... then i spent the next two weeks hookin everything up so it was drivable!
LOL idk how u wait this long.. i was way to anxious to find out if mine was going to run or not.. i started mine before i had ANYthing hooked up! lol ... then i spent the next two weeks hookin everything up so it was drivable!
#7
warm butter on toast
Thread Starter
Join Date: Jan 2005
Location: The boonies, CT
Posts: 6,485
Likes: 0
Received 0 Likes
on
0 Posts
I waited because I got sick of the damn thing. But yea, I got everything back together. I just gotta hook up the battery. It's just that every tutorial i see says "you don't want to ruin you're motor now that it's in!" Woops and forgot my damn shift linkage.