This a deal?
04-21-2005, 01:04 PM
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: Westminster, MD
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
This a deal?
99' B18c1 GSR engine
JE pistons 0.20 bore over ( 11.1 compresion ratio )
Eagle H-beam Rods
LS Crankshaft polishes ( LS run better for all motor )
Bomb Proof Sleeves
New water pump
New oil pump
New starter
New belts
New B18 head gaskets set ( top - bottom )
New Transmission
Mint ACT 4 pucks with Extrem pad clutch
Type-r Red valve cover
"Only things that don't come are wires hardness and engine mounts "
Total: $2,000.00
P.S. I have a honda civic ex (auto)
JE pistons 0.20 bore over ( 11.1 compresion ratio )
Eagle H-beam Rods
LS Crankshaft polishes ( LS run better for all motor )
Bomb Proof Sleeves
New water pump
New oil pump
New starter
New belts
New B18 head gaskets set ( top - bottom )
New Transmission
Mint ACT 4 pucks with Extrem pad clutch
Type-r Red valve cover
"Only things that don't come are wires hardness and engine mounts "
Total: $2,000.00
P.S. I have a honda civic ex (auto)
04-21-2005, 01:44 PM
#3
Registered User
Thread Starter
Join Date: Apr 2005
Location: Westminster, MD
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
ill find out as soon as i talk to him again.
i have a d series honda automatic... im obviously going to buy a new tranny (manual) for the engine.. how much trouble is it to install a manual in replace for a automatic?
i have a d series honda automatic... im obviously going to buy a new tranny (manual) for the engine.. how much trouble is it to install a manual in replace for a automatic?
04-21-2005, 01:49 PM
#4
CockBlockerator
Join Date: May 2002
Location: philly pa
Posts: 1,771
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by waterboy
ill find out as soon as i talk to him again.
i have a d series honda automatic... im obviously going to buy a new tranny (manual) for the engine.. how much trouble is it to install a manual in replace for a automatic?
i have a d series honda automatic... im obviously going to buy a new tranny (manual) for the engine.. how much trouble is it to install a manual in replace for a automatic?
04-21-2005, 02:01 PM
#6
CockBlockerator
Join Date: May 2002
Location: philly pa
Posts: 1,771
Likes: 0
Received 0 Likes
on
0 Posts
honestly, that price is too good..
sleeves alone cost about 700-1200 bucks
and i would only get sleeves done by a few select companies...
last thing you want is a sleeve to drop and ****ing seep coolant everwhere
sleeves alone cost about 700-1200 bucks
and i would only get sleeves done by a few select companies...
last thing you want is a sleeve to drop and ****ing seep coolant everwhere
04-21-2005, 02:12 PM
#7
Registered User
Thread Starter
Join Date: Apr 2005
Location: Westminster, MD
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I just got an email from the guy
"We built the motor me and my borther but the press in sleeves of couse the machine shop DJ machine shop we don't do that we don't want mess with that if you do wrong it might cause you big problem blow you block and crack... we got the sleeves from bomb proof....My brother is working and running a performance shop in town, something like machine work we got to bring to machine shop and we also got good deal on parts and connect with another shop like speed Image..and another shop we do research plan the project before we do it..we want it good and fast because it also use represent for our shop..."
"We built the motor me and my borther but the press in sleeves of couse the machine shop DJ machine shop we don't do that we don't want mess with that if you do wrong it might cause you big problem blow you block and crack... we got the sleeves from bomb proof....My brother is working and running a performance shop in town, something like machine work we got to bring to machine shop and we also got good deal on parts and connect with another shop like speed Image..and another shop we do research plan the project before we do it..we want it good and fast because it also use represent for our shop..."
04-21-2005, 02:16 PM
#9
CockBlockerator
Join Date: May 2002
Location: philly pa
Posts: 1,771
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by waterboy
I just got an email from the guy
"We built the motor me and my borther but the press in sleeves of couse the machine shop DJ machine shop we don't do that we don't want mess with that if you do wrong it might cause you big problem blow you block and crack... we got the sleeves from bomb proof....My brother is working and running a performance shop in town, something like machine work we got to bring to machine shop and we also got good deal on parts and connect with another shop like speed Image..and another shop we do research plan the project before we do it..we want it good and fast because it also use represent for our shop..."
"We built the motor me and my borther but the press in sleeves of couse the machine shop DJ machine shop we don't do that we don't want mess with that if you do wrong it might cause you big problem blow you block and crack... we got the sleeves from bomb proof....My brother is working and running a performance shop in town, something like machine work we got to bring to machine shop and we also got good deal on parts and connect with another shop like speed Image..and another shop we do research plan the project before we do it..we want it good and fast because it also use represent for our shop..."
Benson, Darton, ERL, Golden Eagle, RS Machines, AEBS are some i would deal with...
Is it a shipped item, or can you actually go and check it out?