Axle back for 99 GSR.
#1
www.ufc.com
Thread Starter
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
Axle back for 99 GSR.
As some may know my car was put back to complete stock due to a CARB violation I had to go the CA Referree station for. Anyways, I put my CAI back on but that is all I have done. I don't want to do the whole exhaust again, that one bolt on the top that joins the exhaust and the cat is a pain in the ass. I just want an axle back to give it some tone and a little more performance. Does anyone know of any good ones, or where to find one?
#2
I
Join Date: Jan 2001
Location: Westside til I die
Posts: 56,525
Likes: 0
Received 0 Likes
on
0 Posts
Unless you go catback, you won't get any performance...just a bottleneck. However, I believe the Apex'i N1 comes in an axleback or at least it used to, Spoon N1, OEM ITR. I'm sure there are some people selling just the axle back to their exhausts on ebay/partstrader.
#3
www.ufc.com
Thread Starter
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Master Yodub
Unless you go catback, you won't get any performance...just a bottleneck. However, I believe the Apex'i N1 comes in an axleback or at least it used to, Spoon N1, OEM ITR. I'm sure there are some people selling just the axle back to their exhausts on ebay/partstrader.
#4
I
Join Date: Jan 2001
Location: Westside til I die
Posts: 56,525
Likes: 0
Received 0 Likes
on
0 Posts
Stock piping is not 2.25". What I refer to when I say bottleneck, is that you're still going to have OEM size exhaust piping which is small and restrictive, and then a 2.25" rear section. The OEM B pipe will restrict your flow enough that the rear section won't help as much as a full catback. Mandrel bending is effective to any aftermarket exhaust...not just for forced induction.
#7
Registered User
Join Date: Jan 2005
Location: Rosemead, California
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Someone in San Gabriel Recycler is selling their Apex N1 axle-back for $105... I would jump on that one but i'm getting a GReddy Evo2 from a hook up @ GReddy in Irvine...
#8
www.ufc.com
Thread Starter
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Master Yodub
What'd you do with your old exhaust?