Camber Kit help
#2
Still here... sorta...
Images in these threads to help you understand:
https://www.honda-acura.net/forums/s...ghlight=camber
https://www.honda-acura.net/forums/s...ghlight=camber
https://www.honda-acura.net/forums/s...ghlight=camber
https://www.honda-acura.net/forums/s...ghlight=camber
#3
Registered User
Join Date: Jan 2003
Location: Utah
Posts: 1,881
Likes: 0
Received 0 Likes
on
0 Posts
search "rear washer trick" to see a cheap and very reliable way to fix your rear camber, and then for the front you need to get decent one. I would suggest the new Omnipower front upper control arms because they are cheaper than skunk2 for the most part and are a quality peice
#5
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MPerson
How much of a drop is the S Tech? Isn't just a ~1.8" drop? Your camber shouldn't needed to be corrected unless i'm wrong about the drop.
#6
NASA-VA Hyper-Announcer
Join Date: Feb 2004
Location: Cary, NC
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Shmoo
With that much of a drop, a camber kit is almost necessary. I have a 2" drop and camber kits were necessary on both front and back. I have Skunk 2 in the front and Ingalls in the back.
#7
my bum is on the swedish!
Join Date: Mar 2002
Location: San Antonio, Texas
Posts: 10,133
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Solracer
You never know if it neccisarry before you get an aligment, most hondas their spec is .5 to -1.5 degress of camber, I have ran with -2.0 for a long time and got over 35000 miles on the set of tires I was on. Get an aligment first, then see if it is neccasiary, toe is your enemy camber is not.
I'm down about 2.25", and used 3 washers in the rear, and they're like -1.5
for the front, I have omni UCA's, and they're great. they're in spec
#9
I just paid for a new ball joint and a toe alligment. so far it seems to have almost solved the problem the guy at the shop told me that he thought that my problem was the toe from the bad ball joint. Should I even worry about a chamber kit now, my tires already need to be replaced from the horrible toe problem.