Any special tools I might need to install my H&R sports on my 97 Accord?
08-09-2004, 04:56 AM
Member
Thread Starter
Join Date: Aug 2004
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Any special tools I might need to install my H&R sports on my 97 Accord?
I got all the basic tools, and I am renting a spring compressor from autozone. I got some WD40 for stuck bolts. So is there anything I am forgetting?????
08-09-2004, 06:31 AM
You know me...
Join Date: Jun 2003
Location: 192.168.0.100
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
a torque wrench and a manual...those were the two best tools I had when I did my suspension.
Have fun!
08-09-2004, 06:44 AM
Member
Thread Starter
Join Date: Aug 2004
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
how much is a torque wrench?
08-09-2004, 09:32 AM
You know me...
Join Date: Jun 2003
Location: 192.168.0.100
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
$25 at your local auto parts store. If you don't have a socket set, that might run you $10 for a decent set.
08-09-2004, 01:59 PM
Senior Member
Join Date: Jun 2002
Location: San Diego, CA
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
An electric impact wrench might not be bad. It was $30-40 at Kragen.
Also Liquid Wrench would work better than WD-40. Spray that on the night before.