yankee81116

I just bought 4 red LED bulbs. I installed the rear ones first and i was very pleased. Then i installed the front ones. The first one worked. Then, when i finished installin the second one, i put on my hazard lights, and a weired noise would come up and the blinker signals on the gauge cluster would stay lit. I concluded that it was to let me know there was some error. None of the turn signals would work. I then replaced the last one i put in with the factory bulb...they all worked normally again. I think it might be the wattage difference.(LED is less) You know cuz the computer is sensitive to that kinda stuff. Any other ideas???? Thanks!!!!

Prelude00Red

where did you get the rear red ones from?

i want em

yankee81116

The front ones and rear ones are the same but i got em from sounddomain.com However the lenses for the turn signals are orange if u look closely, so with the red LEDs it comes out like a dark orange. Anybody have any ideas about my problem???

4thgenlude

no idea, you should call or email the place you got em from and ask them about it,thats what id do

Pelka

:wopics:

Meguel24

If using leds for turn signal applications, or in vehicles that have built in dashboard bulb-out warning systems (such as BMW Mercedes and others) , load equalizers may be required

http://autolumination.com/installation.html

read that page