6th GENS: What 6.5" door aftermarket speakers are you using?
#1
THE RED 6th GEN Coupe
Thread Starter
Join Date: Jun 2002
Location: Chicagoland, IL
Posts: 1,689
Likes: 0
Received 0 Likes
on
0 Posts
6th GENS: What 6.5" door aftermarket speakers are you using?
What are you fellow sixth gen owners with stereos running for aftermarket speakers?
I'm interested in model numbers too, so I can look up size specs.
How much depth modification was required to make them fit?
I'm planning to install some new 6.5" speakers in my doors this spring. I'm having trouble picking out a 6.5" speaker that can handle 75w RMS from my JL Audio 300/4 amp.
I'm 99% sure the Accord has a 2" depth stock for the speakers.
I'd like to find a good quality speaker for my doors but I don't want to modify them much.
Anyone know the depth on JL Audio and MB Quart speakers; co-axials are fine by me as well. Neither site lists the top mount depth. And CF has some fairly weak speakers. from what I've seen. I'm looking for clean power too. I plan to run a Nakamichi head unit so clean smooth power is my goal. My sub will handle the bang!
I'm interested in model numbers too, so I can look up size specs.
How much depth modification was required to make them fit?
I'm planning to install some new 6.5" speakers in my doors this spring. I'm having trouble picking out a 6.5" speaker that can handle 75w RMS from my JL Audio 300/4 amp.
I'm 99% sure the Accord has a 2" depth stock for the speakers.
I'd like to find a good quality speaker for my doors but I don't want to modify them much.
Anyone know the depth on JL Audio and MB Quart speakers; co-axials are fine by me as well. Neither site lists the top mount depth. And CF has some fairly weak speakers. from what I've seen. I'm looking for clean power too. I plan to run a Nakamichi head unit so clean smooth power is my goal. My sub will handle the bang!
#2
#CustomUserTitle
Join Date: Mar 2002
Location: glass case of emotion
Posts: 63,854
Likes: 0
Received 0 Likes
on
0 Posts
Pioneer TS-A1664 - $70
very similar to the A1661's pictured below
not top of the line speakers, but it fit without any mods. it has a nice clean high, decent mids, but the lows aren't there. that's what the sub is for h:
very similar to the A1661's pictured below
not top of the line speakers, but it fit without any mods. it has a nice clean high, decent mids, but the lows aren't there. that's what the sub is for h:
#4
So Fresh & So Clean Clean
Join Date: Sep 2003
Location: Alpharetta, GA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Infinity KAPPA 63.5I - Front
Infinity KAPPA 693.5I - Rear
Hooked up to a Kenwood KAC-649S 320W 4-Ch Amplifier.
:thumbup: Good sound, I think I'm going deaf.
Infinity KAPPA 693.5I - Rear
Hooked up to a Kenwood KAC-649S 320W 4-Ch Amplifier.
:thumbup: Good sound, I think I'm going deaf.
#5
WEEEEE!!!!!
Join Date: Oct 2002
Location: At Red Line!
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
I'm gonna have the Boston Rally RX67's in the door pretty soon. They were in my friends car and they sounded hella clean. They were also fairly inexpensive for me at least.
#6
THE RED 6th GEN Coupe
Thread Starter
Join Date: Jun 2002
Location: Chicagoland, IL
Posts: 1,689
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by clean2draccord
Infinity KAPPA 63.5I - Front
Infinity KAPPA 693.5I - Rear
Hooked up to a Kenwood KAC-649S 320W 4-Ch Amplifier.
:thumbup: Good sound, I think I'm going deaf.
Infinity KAPPA 63.5I - Front
Infinity KAPPA 693.5I - Rear
Hooked up to a Kenwood KAC-649S 320W 4-Ch Amplifier.
:thumbup: Good sound, I think I'm going deaf.
Bwatkins: Did you have to cut for the Bostons to fit?
#8
Registered User
Join Date: May 2003
Location: Ormond Beach FL
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
I'm running Infinity Reference 6.5's in my 5th gens doors, probably would fit in yours too. I think they're 180w peak. Sound good with out and amp, but I'm, planning on getting one for my mid's and highs soon.
#9
Tastes like DonkeyBalls
Join Date: Jul 2002
Location: NJ
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
running adire koda 6.5.. depth 3inches with peerless RDC2000 tweet in stock tweet location and max fidelity 30mm silk dome tweets in door panel all running off of arc audio 2100cxl. Crossover made by me using goertz inductors and kimber caps for a simple 12db rolloff centered around 3000hz
www.adireaudio.com
www.adireaudio.com