be happy you're not me
#1
Reset?
Thread Starter
Join Date: Jun 2003
Location: nor cal
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
be happy you're not me
the other night i was bidding on this and at the last second i was outbid after me and this guy were going back and forth
it sucked
such a ****in steal
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2445704286
it sucked
such a ****in steal
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2445704286
#2
Actually you might want to consider yourself blessed.
If you don't know who did the porting I wouldn't trust it. Guy might have done it himself with a dremel in his backyard.
If you don't know who did the porting I wouldn't trust it. Guy might have done it himself with a dremel in his backyard.
#4
Originally posted by 92lx
for that amount, you could have JG (a pro) do your head for you, in fact, cheaper. $190 for their 3 angel valve job mild port job.
- Nathan
for that amount, you could have JG (a pro) do your head for you, in fact, cheaper. $190 for their 3 angel valve job mild port job.
- Nathan
#5
Guest
Posts: n/a
gains with port work are up in the air and dependant upon your previous modifications etc, just as with any modification. But let's say that with the right mods it'd be about the same as adding an intake or something along those lines. Add to that a camshaft and you have potential for 15-20hp.
- Nathan
- Nathan
#6
Im So JDM
Join Date: Dec 2002
Location: Portland Oregon
Posts: 3,724
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by guaynabo89
Actually you might want to consider yourself blessed.
If you don't know who did the porting I wouldn't trust it. Guy might have done it himself with a dremel in his backyard.
Actually you might want to consider yourself blessed.
If you don't know who did the porting I wouldn't trust it. Guy might have done it himself with a dremel in his backyard.