windshield wiper piping broke
12-03-2003, 07:56 PM
#1
bboy Wesley West
Thread Starter
Join Date: Oct 2003
Location: six-five-o
Posts: 15,390
Likes: 0
Received 0 Likes
on
0 Posts
windshield wiper piping broke
The windshield wiper fluid line is broken and i was wondering how i could repair it. On the image thrs a red circle, the windshield wiper fluid sprays out the damaged area, the hole is about 3/4". i cannot duct tape it because the rubber piping is extremely flexible and would jus leak. Does anyone know how to replace this or where to buy it? In a parts search, like a salvage place online, i cannot find cigarette lighter (since i also need to replace those) thx
12-04-2003, 12:41 PM
#2
Member
Join Date: Jun 2002
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
You can replace the soft line with a line from home depot or Lowes...if you go in the plumbing section they have alot of difference sizes, one will work for you, you can buy a bundle and use it for other things too. Its like 2 or 3 bucks
o ya and i also have a cig lighter from a 5th gen ill sell for 5 shipped
o ya and i also have a cig lighter from a 5th gen ill sell for 5 shipped
12-05-2003, 10:19 AM
#6
Registered User
Join Date: Nov 2003
Location: Southeast
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
The easiest way I fixed my honda was I went to an auto parts store and bought some rubber tubing connectors. They have them for all sizes of tubing and they have ribbs to hold the ends together. Cost: 1.98, Time: 1 minute to connect the ends of the tubing. Problem solved.
