Notices
Parts Classifieds Non-commercial posts only.

FS: Brand New Ingalls 3570 Front Camber Kit (accord 90-97, integ 90-00, etc...)

Thread Tools
 
Old 10-25-2003, 12:38 PM
  #1  
mistikal07
Junior Member
Thread Starter
 
mistikal07's Avatar
 
Join Date: Apr 2003
Location: West Coast
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default FS: Brand New Ingalls 3570 Front Camber Kit (accord 90-97, integ 90-00, etc...)

These are brand new, never been used, and box never opened Ingalls 3570. They are the polyurethane bushings with an adjustment range of -3/4° to 1°.

Applications:
1988-91 Honda CRX
1988-95 Honda Civic
1993-97 Honda Del Sol
1990-00 Acura Integra
1992-94 Acura Vigor
1997-01 Acura 3.5 RL
1997-99 Acura 3.0 CL
1996-01 Acura 3.2 TL
1995-98 Acura 2.5 TL
1997-00 Acura 2.3 CL
1990-97 Honda Accord
1992-96 Honda Prelude
1995-98 Honda Odyssey
1996-98 Isuzu Oasis
1992-2001 Honda Prelude (Rear)

$100 shipped / OBO
email me at zero07seven@hotmail.com



Old 10-26-2003, 10:24 AM
  #2  
mistikal07
Junior Member
Thread Starter
 
mistikal07's Avatar
 
Join Date: Apr 2003
Location: West Coast
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

ttt
Old 10-27-2003, 09:37 PM
  #3  
slammed91-hatch
Registered User
 
slammed91-hatch's Avatar
 
Join Date: Apr 2003
Location: Washington State
Posts: 1,127
Likes: 0
Received 0 Likes on 0 Posts
Default

where you at on the west coast?
Old 10-27-2003, 10:49 PM
  #4  
mistikal07
Junior Member
Thread Starter
 
mistikal07's Avatar
 
Join Date: Apr 2003
Location: West Coast
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Bay Area / Sacramento
Old 10-28-2003, 11:42 PM
  #5  
slammed91-hatch
Registered User
 
slammed91-hatch's Avatar
 
Join Date: Apr 2003
Location: Washington State
Posts: 1,127
Likes: 0
Received 0 Likes on 0 Posts
Default

do you know how low i could have my 91 hatch on those with good camber?
Old 10-29-2003, 05:40 AM
  #6  
93accord4door
upgraded to 97 ;]
 
93accord4door's Avatar
 
Join Date: May 2003
Location: miami
Posts: 344
Likes: 0
Received 0 Likes on 0 Posts
Default

i have a 97 accord with a 2.5 drop, that a good camber kit for it?
Old 10-29-2003, 07:44 AM
  #7  
mistikal07
Junior Member
Thread Starter
 
mistikal07's Avatar
 
Join Date: Apr 2003
Location: West Coast
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Get an alignment done. Find out how much your camber is tweaked, then see if this camber kit fits your need. It will definately fit on an accord '97.

Most car shops have a warranty on alignment, whether it be 2 weeks to 6 months, where you can take it back and get it realigned. Just ask about it.
Old 10-29-2003, 07:50 AM
  #8  
mistikal07
Junior Member
Thread Starter
 
mistikal07's Avatar
 
Join Date: Apr 2003
Location: West Coast
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

This camber kit should be good between 1.5" to 2.2". However, that is not what matters. What really matters is if the camber of your car is within -3/4° to 1°. All cars are different and some can be lower than others for the adjustment range to be around -3/4° to 1°. It just so happens that a 1.5" to 2.2" drop on average usually gives you an adjustment range between -3/4° to 1°. Hope this helps.
Old 10-30-2003, 01:15 AM
  #9  
mistikal07
Junior Member
Thread Starter
 
mistikal07's Avatar
 
Join Date: Apr 2003
Location: West Coast
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Sold.




All times are GMT -8. The time now is 01:24 AM.