Notices

Exhaust question

Thread Tools
 
Old Jun 20, 2003 | 10:47 AM
  #1  
Rex Carnage's Avatar
Rex Carnage
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 7
Likes: 0
From: Ocala
Default Exhaust question

I've got a 93 prelude Si that I'm starting to put together and would like some informed opinions.

I'm going with a DC Sports header and intake, and looking at the Gude Head package, but would like to know of a good cat back exhaust that won't have a high pitched tinny sound. I'm looking for something a little throatier. Any thoughts? DC Sports, GReddy, Apexi, etc.

Thanks.
Reply
Old Jun 20, 2003 | 11:08 AM
  #2  
crzyaccord01's Avatar
crzyaccord01
Junior Member
 
Joined: Jun 2003
Posts: 3
Likes: 0
From: Chicago area
Default

The Apexi N1 sounds great on just about any car. Its not ricey at all, like those damn lawnmower civics i see everywhere. but it has a pretty nice rumble to it. And Apexi actually does make an N1 for your car...prolly no more than $480 or so
Reply
Old Jun 20, 2003 | 11:11 AM
  #3  
Rex Carnage's Avatar
Rex Carnage
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 7
Likes: 0
From: Ocala
Default

Thanks, I'll check out the Apexi N1.
Reply
Old Jun 20, 2003 | 12:50 PM
  #4  
clickwir's Avatar
clickwir
Floppy Death! noES!!!
 
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
Default

Some people think the N1 is too loud. I'd suggest find someone that has it and hear it. The APEXI WS is also a good choice that will work nicely and is quieter.
Reply
Old Jul 5, 2003 | 11:42 AM
  #5  
LudeBehavior's Avatar
LudeBehavior
Senior Member
 
Joined: Jun 2002
Posts: 151
Likes: 0
From: Georgia
Default

I would have a shop custom mandrel bend your pipes from the cat to the rear and then put a MAC Flowpath muffler on it. you can get them in polished stainless steel, but they are not canister mufflers like all the ricey ones. They are made for camaros and mustangs, so the baffles inside are tuned differently and sound way throatier on smaller engines. good power too. The muffler is only about 13 inches long by 8 or 9 wide and they cost about 85 bones. That's just what I'd do, but I'm not conventional so it's all good.
Reply




All times are GMT -8. The time now is 04:49 PM.