h22 won't rev past 6800, vteec problems.
 

So I've posted this numerous places with no help or anyone to actually find the problem yet. So the problem I have is that when I try to engage Vtec, it works fine all the way till 6300-6800 then it cuts out, no back fire or misfireing, just cut's out for about 3 seconds then if I try to get back on it Vtec won't engage for about 10 seconds, so I gotta wait then it will engage fine, but still won't rev past this point. I just find it odd how it dosen't give me a cel for this.So if anyone could help me that would be great!. Useing a p13, only cel is egr, oil level is fine, Cleaned Vtec solenoid,

If you throw any code...you stay in retard mode lol

Only some cel's put the car into limp mode... Egr code does not put the engine into limp mode. I would apreciate some productive help and not dumb comments plz.

Just fix it and see what happens

Oh yeah and for the P13 ECU 6800 is the redline

I can't fix the egr cause I don't have all the parts for it, the h22 is in my integra, it was working fine for 2 weeks then i ran into problems. And the redline on a h22 is 7200, fuel cutoff is 7800... I'm not sure where ur getting ur info. I can find millions of ppl and threads to vouch for me on that one.

First off which H22 are you using?

Have you changed your oil recently? This is a serious question too.

Yeah he stated that its fine...I gotta feeling is running an A1...which redline is 6800 :o

Yeah I'm ganna change the oil again, it's been bout 2000 miles. It's an obd1 h22a jdm. Thanks for the help so far.

Well the problem is the ECU then....if you want to ruin your engine and raise the redline....than chip the ECU.