does any one know if B20 fuel injectors will go on a H23???

 

and also will the B20 radiator work on the H23

 

what b20 are we talking about here, i assume u are talking about the CRV motor. in that case NO, they are saturated injectors, and 4th gen ludes require peak+hold injectors. however it is possible to mod the wiring...

the h23a1 4th gen prelude si uses 240cc P+H injectors, most hondas are 240cc so most likely the injectors are of proper size although i cant swear to it.

~kris

 

Off the subject a little. Does anyone know where to get h22a1 345cc oem injectors?

 

no the injectors are off of a 89 prelude

 

they may just work, but u never know unless u try
they are P+H for sure, i used to have a 3g and i remember the resistor box...
pop em in, see where it gets you...the engine probably wont idle correctly if they are mismatched.

as far as the 345cc h22a/1 injectors go...GOOD LUCK
i bought a used jdm set off ebay that took a shit a year later, then i just had the originals (originally seized up) rebuilt by RC, but that was a song+dance because one of the repaired injectors from RC was still frozen when i got it back, so had to send back AGAIN. luckily they covered the shipping. but i still dont trust those RC repaired ones, i think the cores weren't good enough and RC just cleaned em and sent em back.

~kris