92-95 Non-vtec integra ecu chips (OBD1 PR4 & P74/5 & P72). I can modify your rev limiter, fuel and ignition maps, and full throttle launch. The full throttle launch can set your RPM at any point you wish, and you can set the crossover point (Speed at which your normal rev limiter is used) at any speed (MPH).

Heres a picture of the program i'm using to modify the roms: http://pgmfi.crx-forum.org/phorum/d...59,164/erm.jpg.

ALL programs run stock fuel/ignition maps unless you chose to have the changed. The chips are eeproms so u can change/tune them w/out buying a new eprom. If you chose to have the maps changed, i will give u a graph of the stock maps, ,and a graph of the modified maps so you kno exactly what was changed! Price is $50 regardless of the options used.


I took a short video of my launch. You have to watch carefully for when I start because theres no audible change in the exhaust tone/pitch.

http://geocities.com/xokappa/ftl.avi

 

http://pgmfi.crx-forum.org/private/johndoe-ftl.avi

heres a mirror

 

Bump :thumbup:

 

I also have a spare (OBD1) PR4 that will run any non-vtec integra (and some non-vtec civics), and it is already chipped (with Full Throttle Launch), its just a bolt on mod The ecu originally came out of my 93 Integra LS, but will work fine on 94-95's too. This is the ECU I was usng in the video. There is a problem tho, the O2 Heater circuits on he board got fried when my o2 sensor shorted The car runs fine, i drone it liek that for a year, only drawback is slightly decreased gas milage, I got 25 mpg drivign from abilene to dallas (99% highway) just to give u an idea of how the gas milage is.

$100 obo