Was saving parts for a looooooooooong time. Never completed my project, moved out here to California. Deploying in March, probaly gonna buy a new vehicle when I get back. Heres a quick breakdown of what I have.

Mitsu 14b turbo with a BRAND NEW HOUSING. Its a steel housing, wont crack like the stock iron cast housings (I bought two, both had cracks). The housing is the same as this one You can upgrade the turbo to the 16g and use the same housing. Never used the turbo, no bent/chipped fins. Spins freely. I put in a new oil feed nipple. I think I have the oil feed like too here somewhere.

Misc. silicone hoses, 2.25 with a few 2.25-2.5 ones.

Bunch of 2.25 clamps and a few 2.5 clamps.

440cc injectors with OBDI clips.

Two OBDI D-series ECU's with OBDIIa-OBDI harness, one chipped one not. The chipped one has an X on it and a chip in it (obviously). Conservatively tuned for 7psi.
*edit*ECU's are P06 (non-VTEC ECU's)

Magnaflow 2.5 turbo muffler.

D16 pistons, good up to 1bar PSI. Teflon coated, its off the Vitara. Japan AC8A Spec. Aluminum. Its made differently, I dont remember how. You can do a search on Google to find a more through description.

Defi D-Gauge Boost gauge, 2 1/16".

New D16 tapped oil pan.

I think thats all. Heres a pic of everything.


Turbo and housing-$250
Injectors with clips-$150
ECU's with harness-$150
Pistons-$80
Silicone hoses with clamps-$100
Muffler-$60
Boost gauge-$80
Oil pan-$50

Prices are OBO.

A lot of this stuff was purchased off HT. You can do a search for my SN and probaly find out more about the pistons and stuff. Might have some other stuff hiding somewhere. PM or AIM if interested. Thx.

 

Bump again.

 

Where in so cal are you? I am interested in the muffler. Do you have any more pics of it? I am mainly concerned with the outlet. I don't want anything too big. Can you measure it for me?

 

has the ecu been tested and can u verify that it works? im starting a build and wouldnt be able to test for like 6 mos or more so i wouldnt want to find out it dosnt work then.

 

Located near Oceanside but I can go from SD to LA. The muffler has a 4" outlet I think. From what I hear, its a low tone. Will take pics later today.

Got the ECU chipped and the harness from Kenji on HT I think. Has not been tested.

 

Muffler Sounds Good, Is it fine if i pull a local pick up located from Ontario off the 60frwy!

 

Dude I have no idea where that is. Preferably somewhere between San Diego and Los Angeles.

 

Dude its right between La and San Diego serious like right between.. you know where the Ontario Mills Mall is? Ontario Airport? well anyways is the muffler still for sale?

 

Oh haha ok. PM me with the details if you want it.

 

Pm'd You