Paintball gun and equipment for sale...
#1
Terd Furgeson
Thread Starter
Join Date: Jul 2002
Location: Ringgold, GA/ Chattanooga
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Paintball gun and equipment for sale...
I have a Pro Team Products FX Autococker. Is has a Dye 14" aluminum barrel, a Smarts Parts barrel 12" splashed purple/green w/ polished back half, a Tru- FLight 14" barrel, cut stock barrel w/ silencer, KAPP Drop Zone drop forward in annodized purple, AirAmerica Raptor 68ci/4500psi carbon fiber wrapped nitrogen tank w/ adjustable regulator and Lok-Sok,quick disconnects and on off slide check valve,Benchmark 45 frame, polished w/ DYE sticky grips,Shocktech trigger shoe and custom drilled trigger slide,Purple annodized ANS 3way,Purple annodized Shicktech cocking rod,Shocktech chrome beavertail,ANS adjustable velocity pressure kit w/key, Pro Team products sight rail,KAPP reverse P-block/ chrome,Shocktech Delrin bolt,Plamer Rock regulator,ANS hammer kit,ANS expansion cahmber, polished front block,polished power feed,Ratt valve,lightened trigger job, all stainless rods, Gun has Custom Mystic paint job.......flips green to purple with polished accents. 18volt Revolution hopper with custom shock sensor modification ( works much better then the infrared eyes). Gun shoots extremely accurate and fast and looks awesome. I also have a Raven Nuvis 2.1 mask with self tinting lenses, Redz pack with 140 round pods, JT gloves,huge JT gear bag,Orange Skeleton Jersey,cable squeegee, all stock parts from gun and some other misc paintball things that go with it. My wife and I just had a baby and I need a transmission. I dont play much anymore so I could put the money to tomething i do.....my car. This gun is really nice and been taken very good care of. EMAIL ME IF INTERESTED OR MAKE ME AN OFFER. NO LOWBALLERS BECAUSE i KNOW WHAT i HAVE IN THIS GUN AND EQUIPMENT. THANKS. THANKS..................MIZTURYOUS@AOL.COM
#5
Terd Furgeson
Thread Starter
Join Date: Jul 2002
Location: Ringgold, GA/ Chattanooga
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics.....if you want more I have them also.
here it is flipped purple.....the lighting asnt very good here though:
this is another mask I have also. Its a JT with a bit of custom work.
here it is flipped purple.....the lighting asnt very good here though:
this is another mask I have also. Its a JT with a bit of custom work.
#7
Terd Furgeson
Thread Starter
Join Date: Jul 2002
Location: Ringgold, GA/ Chattanooga
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Here is a breakdown of what I have and the cost of them new:
Raven mask:80.00
JT mask:75.00 add thermal lense 25.00
JT gloves:38.00
Jersey:55.00
Redz Pack:100.00 w/140 round pods
JT GEAR BAG: 90.00
DYE barrell:75.00
TruFlight barrel. 55.00
Smart Parts/accepts bore adaptors:100.00
J&J ceramic(not pictured): 55.00
Stock with homemade silencer(works nicely):25.00
18volt revolution hopper:80.00 add shock sensor upgrade:25.00
Air America Raptor 68ci/4500psi:399.00
Lok-Sok:30.00
KAPP Drop Zone:65.00
Shocktech beavertail:15.00
Shocktech rear cocking rod:17.00
Shocktech trigger shoe:11.00
KAPP reverse P-block: 23.00
Shocktech bolt:49.00
Pro Team products sight rail:35.00
DYE sticky grips:35.00
Benchmark 45 frame:75.00
Slide check:30.00
Gas through grip:28.00
ANS short stroke 3 way:37.00
ANS trigger plate and rod:38.00
Palmer Rock regulator:55.00/add adjustable knob 10.00
ANS RAM:42.00
All stainless rods: 40.00
NEW DESIGNZ Low pressure chamber 35.00
ANS Velocity adjuster:25.00
Rat valve:45.00
Low pressure spring kit: 28.00
ACI pressure guage with stainless right angle:30.00
ProTeam Products FX Cocker:659.00
There are other misc part such as (extra hopper,paintballs/almost a case of Anarchy,stock parts,elbows,oil,hoses,etc.....that will go with it.)
All of this comes to about 2600.00 not to mention that I had this gun sent to Bob Long himself to do the trigger job on it. Then sent to ProTeam products for fine tuning, which were both about 60.00 each job. And then I had the gun painted in Cobra Mystic paint color and spent the time polishing various parts of the gun, which if you have ever tried to polish an annodized black gun"its a *****"
I am asking 1500.00 obo for everything here, which I think is worth it. I didn't go cheap on this gun with all the parts and upgrades I have put on it. And it has been taken very good care of and shoots awesome. Let me know, thanks
Raven mask:80.00
JT mask:75.00 add thermal lense 25.00
JT gloves:38.00
Jersey:55.00
Redz Pack:100.00 w/140 round pods
JT GEAR BAG: 90.00
DYE barrell:75.00
TruFlight barrel. 55.00
Smart Parts/accepts bore adaptors:100.00
J&J ceramic(not pictured): 55.00
Stock with homemade silencer(works nicely):25.00
18volt revolution hopper:80.00 add shock sensor upgrade:25.00
Air America Raptor 68ci/4500psi:399.00
Lok-Sok:30.00
KAPP Drop Zone:65.00
Shocktech beavertail:15.00
Shocktech rear cocking rod:17.00
Shocktech trigger shoe:11.00
KAPP reverse P-block: 23.00
Shocktech bolt:49.00
Pro Team products sight rail:35.00
DYE sticky grips:35.00
Benchmark 45 frame:75.00
Slide check:30.00
Gas through grip:28.00
ANS short stroke 3 way:37.00
ANS trigger plate and rod:38.00
Palmer Rock regulator:55.00/add adjustable knob 10.00
ANS RAM:42.00
All stainless rods: 40.00
NEW DESIGNZ Low pressure chamber 35.00
ANS Velocity adjuster:25.00
Rat valve:45.00
Low pressure spring kit: 28.00
ACI pressure guage with stainless right angle:30.00
ProTeam Products FX Cocker:659.00
There are other misc part such as (extra hopper,paintballs/almost a case of Anarchy,stock parts,elbows,oil,hoses,etc.....that will go with it.)
All of this comes to about 2600.00 not to mention that I had this gun sent to Bob Long himself to do the trigger job on it. Then sent to ProTeam products for fine tuning, which were both about 60.00 each job. And then I had the gun painted in Cobra Mystic paint color and spent the time polishing various parts of the gun, which if you have ever tried to polish an annodized black gun"its a *****"
I am asking 1500.00 obo for everything here, which I think is worth it. I didn't go cheap on this gun with all the parts and upgrades I have put on it. And it has been taken very good care of and shoots awesome. Let me know, thanks
#8
Terd Furgeson
Thread Starter
Join Date: Jul 2002
Location: Ringgold, GA/ Chattanooga
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
DAMN...............I just reread that post and spell check was definately needed there. I did it in a hurry so I didn't pay much attention. Anyway..............................
If anyone is interested make me an offer on it all. Either via email or on here. Thanks.
If anyone is interested make me an offer on it all. Either via email or on here. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Deagle
The Basement
24
11-21-2003 05:28 PM