need help with bumper removal
Thread Starter
Junior Member
Joined: Nov 2002
Posts: 1
Likes: 0
need help with g3 bumper removal
I was in the process of removing the front bumper today and there was one bolt that I couldn't seem to take off. it is on the driver side and I keep unscrewing it but it just keeps turning and turning. here is what i'm talking about
it's the shiny bolt. thanks in advance.
it's the shiny bolt. thanks in advance.
Senior Member
Joined: Apr 2001
Posts: 8,232
Likes: 0
From: Concord, NC
Wonder if the threads have stripped. Try pulling lightly on the bolt and seeing if it comes out. Feel underneath as well and see if there's a washer or a nut on the other side of the frame, on the bolt.
I need sleep...
Joined: Jun 2002
Posts: 3,632
Likes: 0
From: NH
The nut should be welded to the frame...chances are the bolt is stripped...you may need to push on the bolt from below while turning it. I have the same problem with the bolts on the bottom of my front end.