Are these good?
A co worker was telling me about some springs called drop zone.
Is anyone familiar with them. He said they're just as good as eibach & h&r
but cheaper. It'll be for a 98 Gsr.
Is anyone familiar with them. He said they're just as good as eibach & h&r
but cheaper. It'll be for a 98 Gsr.
Drop Zone is an inferior brand; I'm surprised they're still in business.
Their coilover sleeves are known for corrosion between the sleeve and the spring perch.
Ground Control sleeves and Koni Yellows would be a far wiser choice IMO.
Their coilover sleeves are known for corrosion between the sleeve and the spring perch.
Ground Control sleeves and Koni Yellows would be a far wiser choice IMO.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
The coilovers are not good whatsoever. My neighbor had them in his Civic and the sleeve cracked where it made contact with the strut (I think I have pictures). Rather unsafe if you ask me.
I wouldn't use anything named Dropzone it it were given to me free.
I wouldn't use anything named Dropzone it it were given to me free.
DropZone is crap with a capital "C." My buddy and I put them shits on his Civic and the 1st time we tried to adjust it the freakin thread stripped. After a closer look there was an actual hairline crack running right through. It freakin sucked. We had to uninstall the rest and put his stock set up back on. He got his money back, but fuck...what a stinking hassle.
Last edited by ADRONICUS; Apr 15, 2008 at 05:59 PM.
Dont be scared to cut ur springs. I wouldn't have done it but all of the other integra's missing two inches bounce. Mine is pretty smooth. It doesn't see-saw or anything. Just dont slam it!!! Ull bounce off the road! All of those aftermarket springs r harder to keep u from bottoming out so just watch the road. 2 inches with stock ride? I love it!! Dont forget a camber kit and an alignment.
Dont be scared to cut ur springs. I wouldn't have done it but all of the other integra's missing two inches bounce. Mine is pretty smooth. It doesn't see-saw or anything. Just dont slam it!!! Ull bounce off the road! All of those aftermarket springs r harder to keep u from bottoming out so just watch the road. 2 inches with stock ride? I love it!! Dont forget a camber kit and an alignment.
Don't cut your springs, its dangerous!
Camber kit isn't needed...
2) The danger in cutting stock springs lies in the fact that at nearly full extension, the spring can come out of the top seat. I have personally seen it happen on a Jetta and the result was a horror show.
If you want to shoot the shit and be ironic, come on down to the Basement. It's our off topic forum. Please do not people astray by posting suggestions that are downright dangerous and ill-advised.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!


