Notices

Lip scraping

Thread Tools
 
Old Nov 22, 2002 | 12:54 PM
  #1  
TypeR886's Avatar
TypeR886
Thread Starter
Junior Member
 
Joined: Nov 2002
Posts: 17
Likes: 0
From: West Palm Beach, FL
Default

Does anybody else have a problem with their lip scraping on all kinds of things. I have H&R springs installed and I am only a 1.25 lower than stock, but I still scrape on some things. You cant see it unless you feel under the lip. I try and be careful on EVERYTHING that may endanger my baby!

Does anybody know of anything to put inder the lip to limit damage to the lip thanx!
Reply
Old Nov 23, 2002 | 02:01 PM
  #2  
pUrExTc's Avatar
pUrExTc
殺生丸
 
Joined: Oct 2002
Posts: 582
Likes: 0
From: Cerritos, CA
Default

yeah, i get that coming out of my driveway. it's not really noticeable, unless you feelx underneath the bottom of your car though.
Reply
Old Nov 23, 2002 | 05:25 PM
  #3  
bbasso
Guest
 
Posts: n/a
Default

I'm on stock high and still rub the lib everywhere :?
Reply
Old Nov 23, 2002 | 05:53 PM
  #4  
Ford Prefect's Avatar
Ford Prefect
Junior Member
 
Joined: Sep 2002
Posts: 24
Likes: 0
From: Western Maryland
Default

Originally Posted by bbasso
I'm on stock high and still rub the lib everywhere :?
Same here.
Reply
Old Nov 24, 2002 | 12:56 PM
  #5  
ITRacer121's Avatar
ITRacer121
Junior Member
 
Joined: Nov 2002
Posts: 21
Likes: 0
Default

I have eibach springs and they scrape but I just figure they are battle scars :wink:
Reply
Old Nov 24, 2002 | 03:45 PM
  #6  
paul98itr's Avatar
paul98itr
Senior Member
 
Joined: Sep 2002
Posts: 183
Likes: 0
Default

I have the same problem with stock so don't worry it is common. Their isn't much you can do. The dodge viper has aftermarket chin guards you can get, but I highly doubt that will work on the r. I guess if the r's body was made of all fiberglass except in impact zone's we would get something like that too? :wink:
Reply
Old Nov 24, 2002 | 09:45 PM
  #7  
Aj's Avatar
Aj
Senior Member
 
Joined: Sep 2002
Posts: 794
Likes: 0
Default

Our lips, if you look on the bottom have extra screws that aren't conected to anything at the moment, that were originally meant for canards, but I'm sure that if you got nutty with some aluminum sheeting you could make something work.

Good Luck, later,
Aj
Reply




All times are GMT -8. The time now is 08:29 PM.