Will a 15x7 with a 38mm offset rub on a 95 integra? (1.3 drop all 4 corners) Need some opinions...thanks

 

no
i had 17x7 with a +37mm before, and 2.25" drop

 

I have a 17x7 with a +45mm offset, no rubbing.

Then again, thats far in as hell.

you probably wont rub tho

 

My setup:

GC's and Koni's dropped around 1.75 front and 1.5 rear
Rota C8's 15 x 6.5 +38mm
Falken Azenis 205/50/15

I have experienced no rubbing at all during daily driving. I'll let you know if I rub any during extreme conditions like when I autocross this weekend.

P.S. the +38mm offset on the 15's definately get rid of the sunk in look or tuck of the stock rims. They fill the wheel well nicely. Don't stick out of the fender (just slightly at the bottom of the wheel/tire because of my slight negative camber).

Jon

 

thanks for the info!

 

The higher offset you have, the less likely it will rub.
Thus allowing you to run a wider tire if the rim size permits.

If you run a low offset, you will have a fatter lip.