Does anyone have any experience with one of these setups on their Tegs???
It has 26 mm for the front and a 21mm for the back.
I would really appreciate any commments on it.
I am also looking at the Type-R swaybar for the rear as well.
I have a 96 GSR

 

Does nobocy have this on their Teg then?

 

Never knew that made skunk2 sway bars for an Integra. I know the strut bars work nice. I'm getting a lower tie bar and eibach sway bars next. Yup Yup

 

skunk2 make very good sway bars, but...... if you have soft springs you are going to rip out the endlinks. you need to have stiff springs and good shocks.

 

How would the skunk2 sways work with a ground control coil-over with eibach springs. My car is lowered about an inch and half

 

i have the skunk2 swaybar. its a good bar! i have KYB AGX shocks and 5zigen springs. had the bar over a year with no problems.:thumbup:

 

what kind of shocks you have?