Somebody stumbled upon a good deal and is back in the game :rick:
Thread Starter
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Somebody stumbled upon a good deal and is back in the game :rick:
95 EJ
-JDM b18c
-skunk 2 intake manifold
-rear disk conversion
-DC 4-1 followed by RSR Exmag exhaust
-KYB AGX with Eibachs
-ES bushings everyyyyywhere
-Teggy dual bend
-HASport complete mount set
:rick:
boost is in its near future, along with alot of reworking. namely GSR 10.5 front brakes with s2000 master to start. the brakes suck.
the bad....it's teal....
-JDM b18c
-skunk 2 intake manifold
-rear disk conversion
-DC 4-1 followed by RSR Exmag exhaust
-KYB AGX with Eibachs
-ES bushings everyyyyywhere
-Teggy dual bend
-HASport complete mount set
:rick:
boost is in its near future, along with alot of reworking. namely GSR 10.5 front brakes with s2000 master to start. the brakes suck.
the bad....it's teal....
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
I love teal. Better than my chipped up scratched-up black EG I have 
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Thread Starter
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
[Img] https://lh3.googleusercontent.com/-B...0/IMAG0003.jpg [\img]
---------- Post added at 10:06 AM ---------- Previous post was at 10:05 AM ----------
Wtf oh well click link
---------- Post added at 10:08 AM ---------- Previous post was at 10:06 AM ----------
Need ideas on rim colors
---------- Post added at 10:06 AM ---------- Previous post was at 10:05 AM ----------
Wtf oh well click link
---------- Post added at 10:08 AM ---------- Previous post was at 10:06 AM ----------
Need ideas on rim colors
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
Keeping the stock steelies?
If so, I say matte black, just to preserve that slightly rough, sleeperish quality to it.
If so, I say matte black, just to preserve that slightly rough, sleeperish quality to it.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:3
Joined: Aug 2005
Posts: 7,713
Likes: 0
From: BFE
chrome smoke :chuckles:
that's a tough color to put rims on without looking ricey so I'm going to go with :ToDspin: on the matte black. if that's a carbon fiber hood make sure the latch(on the hood) is still in good shape. I've read some horror stories about hoods flying up on the highway.
that's a tough color to put rims on without looking ricey so I'm going to go with :ToDspin: on the matte black. if that's a carbon fiber hood make sure the latch(on the hood) is still in good shape. I've read some horror stories about hoods flying up on the highway.