Notices

Factory ride height

Thread Tools
 
Old May 1, 2003 | 08:44 PM
  #1  
WhiteLitening's Avatar
WhiteLitening
Thread Starter
I'm like dis'........
 
Joined: Sep 2002
Posts: 214
Likes: 0
From: St. Louis, MO
Default Factory ride height

Ok, when I got my car, it was already lowered, well slammed when I got it, so I never knew how high or what OEM ride height lokked like. I have GC now, but I am thinking of getting rid of it and getting a shock/spring combo, maybe the Tokico Illumina set. My question is, I want about a 2 finger gap between my fender and my tire, about how much of a drop would that be? Any suggestions are welcome!! Thanks in advance.
Reply
Old May 1, 2003 | 08:48 PM
  #2  
Kaiz's Avatar
Kaiz
Senior Member
 
Joined: May 2002
Posts: 228
Likes: 0
From: SoCal
Default

My stock teggy has about 3" of total room between the tire and fender in the front. For the rear, theres about 2.75" of room. With my hands (my hands a on the smaller side), a total of 4 fingers fits between the area....So a two finger gap in my case would be a 1.5" drop
Reply
Old May 1, 2003 | 08:51 PM
  #3  
WhiteLitening's Avatar
WhiteLitening
Thread Starter
I'm like dis'........
 
Joined: Sep 2002
Posts: 214
Likes: 0
From: St. Louis, MO
Default

sweet, then the tokico illumina setup will work perfect for the ride height i want because the springs claim to lower 1.5 all around
Reply
Old May 1, 2003 | 08:53 PM
  #4  
WhiteLitening's Avatar
WhiteLitening
Thread Starter
I'm like dis'........
 
Joined: Sep 2002
Posts: 214
Likes: 0
From: St. Louis, MO
Default

anybody have the tokico illumina spring/strut setup w/ the actual tokico spring?
Reply




All times are GMT -8. The time now is 06:46 PM.