ls /vtec idle miss fire
Thread Starter
Senior Member
Joined: Aug 2006
Posts: 100
Likes: 0
ls /vtec idle miss fire
well i have a situation at idle the car miss fire's, but when i give it gas it sounds fine i changed the spark plugs and wires. I'm using a ls distributer with the leg chopped of to fit the b16 head there is a minor oil leak. the cel code is 10 and 1
but that my oxygen sensor and IAT Sensor.. im using a jumper harness to obd1 p28
i think the rotor in the dizzy isn't making a good connection to piston #1 because when i pull the plug it doesn't change idle. what do yall think i hope i made sense
but that my oxygen sensor and IAT Sensor.. im using a jumper harness to obd1 p28
i think the rotor in the dizzy isn't making a good connection to piston #1 because when i pull the plug it doesn't change idle. what do yall think i hope i made sense
Last edited by spoon-eg-; May 26, 2008 at 08:54 PM.
Junior Member
Joined: Mar 2005
Posts: 322
Likes: 0
From: Connecticut
well i have a situation at idle the car miss fire's, but when i give it gas it sounds fine i changed the spark plugs and wires. I'm using a ls distributer with the leg chopped of to fit the b16 head there is a minor oil leak. the cel code is 10 and 1
but that my oxygen sensor and IAT Sensor.. im using a jumper harness to obd1 p28 i think the rotor in the dizzy isn't making a good connection to piston #1 because when i pull the plug it doesn't change idle. what do yall think i hope i made sense
but that my oxygen sensor and IAT Sensor.. im using a jumper harness to obd1 p28
i think the rotor in the dizzy isn't making a good connection to piston #1 because when i pull the plug it doesn't change idle. what do yall think i hope i made sense