the four wires on the left... I need to know its purpose, because I cant seem to figure out what it connects to.

btw http://www.installdr.com/Harnesses/HA-Wiring.pdf doesn't help cause it doesn't even match up

 

Did you cut that harness and try to reconnect the wires? The blue harness is not supposed to be cut like that, you should buy a harness adapter for your accord and the installation would be much cleaner.
The red wires look like speaker, I could be wrong. Use the electronic meter to find out.

 

Me best guess from my chicken scratch diagram from installing my 98 CD in my 91 would be:
Blue = Security In
Black = Security Out
Red = Illumination
Red/Black = Illumination Control

USE AT YOUR OWN RISK!!!!!!!!!!!!

 

blue = securrity
black is a ground(this is a second ground)
red = illumination +
red/blk = illumination -

 

i would get a book that looks bad.you can get the honde etm(electrical trobleshooting manual)its a bit prysey.or you could go to your dealer and get them to print of the harnes info if thay are nice.

 

What the hell are you making?? Are you going to insulate those wires??? Don't ever touch your car again. You have no business working on anything audio related.

 

the info i gave was from mitchell on demand as well as directwire(vipers install lists)

 

kekekekekekeke

mxl36o didnt cut his harness..... he wants to use a newer radio in his teg. so hes making a mating harness.

cousin it and phat99..... those look wrong since theres only 1 illumination wire. Blue is remote turn on.

https://www.honda-acura.net/forums/s...d.php?t=252205

 

i cant even begin to tell you... :dunno:

 

thanks done!