FS: 97 Honda Accord Fully Built Turbo... GREAT POTENTIAL for high HP...
Thread Starter
Member
Joined: Jul 2004
Posts: 66
Likes: 0
FS: 97 Honda Accord Fully Built Turbo... GREAT POTENTIAL for high HP...
Well I have plenty of fun with this car but my parents are getting fed up w/ the car. So I have decided to sell it and get something better. This car was taken care of everyday. Never abused and always loved. I've had great times with this car. I originaly got the car as a hand-me-down from my father in 2002. Ever since then it has gone through some major changes. Major changes are a new redone paintjob in 04, converted from auto to manual 05 and the build this year of 06.
As of this year it has a brand new built motor w/ Forged Internals and a killer Turbo Setup, the engine bay was repainted. ... Here is the setup that is on the car....
Engine:
F22B2 Engine
85mm Wiseco Pistons
CP Piston Rings
Crower Billet Rods
ACL bearings
ARP Head Studs
XTD Stage 3 Clutch
XTD 11lb Chromoly Flywheel
Rebuilt Stock Head w/ new valves and springs
(A/C removed, P/S removed, All EGR and Emissions stuff removed)
Turbo:
Borg Warner GM-8 Turbo (.60 turbine/.70 Compressor, NO SHAFT PLAY)
SPF Manifold
3" OPEN Downpipe and 1.5" Dumptube (dumptube not pictured)
2.5" Aluminum Intercooler Piping
31x9x3 Turbonetics Intercooler
Tial 50mm Style BOV
Tial 38mm Wastegate
3Bar Map Sensor
450cc Blue Top INjectors (in the car)
550cc RC Injectors (when tuning at higher psi)
AEM Fuel Rail
Aeromotive Fuel Pressure Regulator
Fast-Turbo Stainless Fuel Lines
Greddy Catch Can
P06 Chipped for Uberdata
Boost, Oil Pressure, and EGT Megan Racing Gauges
Exterior & Interior & Suspension:
VIS Carbon Fiber Hood Modified for Heat Exchange
ONE of a kind Carbon Fiber SiR Lip
JDM Blackhousing Headlights
JDM Sidemarkers
JDM Rear Accord Garnish
Hella Gen 3 HID w/ h4 adapters
Shaved Moldings and Rear Honda Symbol
Bride Ebay Steering Wheel
NRG Quick Release Hub
Redone Black Interior
Custom Mounted Gauges
Front Upper Strut Bar
Rear Upper Strut Bar
Rear Lower Tie Bar
Hayame FULL coilover Suspension
SSR SP1 Professor 17" wheels
BFGoodrich G-Force 225/45/17 Tires
There will be also other parts that will be included with the car:
Full 2.5" Exhaust system from the header back
Intake System
Stock ECU
Stock Hood
Stock Headlights
Brand New Right and Left Fenders
Brand New Rear Bumper
Used Painted Front Bumper
BFG Drag Radials
Stock Suspension
All Interior Pieces
Two 3A Racing Seats w/ 4pt Harnesses
Please enterntain me w/ offer. Lowballers are welcome BUT PLEASE take into consideration of how much the build cost me. I want at least the amount I spent for the build plus a lil more. So hit me up on AIM under Rhdune16 or email me at Rhdune16@gmail.com ...
VIDEO of how the car performs (ONLY AT 10PSI)
http://video.google.com/videoplay?do...80184879&hl=en
http://video.google.com/videoplay?do...53902298&hl=en
PICS of the car...
As of this year it has a brand new built motor w/ Forged Internals and a killer Turbo Setup, the engine bay was repainted. ... Here is the setup that is on the car....
Engine:
F22B2 Engine
85mm Wiseco Pistons
CP Piston Rings
Crower Billet Rods
ACL bearings
ARP Head Studs
XTD Stage 3 Clutch
XTD 11lb Chromoly Flywheel
Rebuilt Stock Head w/ new valves and springs
(A/C removed, P/S removed, All EGR and Emissions stuff removed)
Turbo:
Borg Warner GM-8 Turbo (.60 turbine/.70 Compressor, NO SHAFT PLAY)
SPF Manifold
3" OPEN Downpipe and 1.5" Dumptube (dumptube not pictured)
2.5" Aluminum Intercooler Piping
31x9x3 Turbonetics Intercooler
Tial 50mm Style BOV
Tial 38mm Wastegate
3Bar Map Sensor
450cc Blue Top INjectors (in the car)
550cc RC Injectors (when tuning at higher psi)
AEM Fuel Rail
Aeromotive Fuel Pressure Regulator
Fast-Turbo Stainless Fuel Lines
Greddy Catch Can
P06 Chipped for Uberdata
Boost, Oil Pressure, and EGT Megan Racing Gauges
Exterior & Interior & Suspension:
VIS Carbon Fiber Hood Modified for Heat Exchange
ONE of a kind Carbon Fiber SiR Lip
JDM Blackhousing Headlights
JDM Sidemarkers
JDM Rear Accord Garnish
Hella Gen 3 HID w/ h4 adapters
Shaved Moldings and Rear Honda Symbol
Bride Ebay Steering Wheel
NRG Quick Release Hub
Redone Black Interior
Custom Mounted Gauges
Front Upper Strut Bar
Rear Upper Strut Bar
Rear Lower Tie Bar
Hayame FULL coilover Suspension
SSR SP1 Professor 17" wheels
BFGoodrich G-Force 225/45/17 Tires
There will be also other parts that will be included with the car:
Full 2.5" Exhaust system from the header back
Intake System
Stock ECU
Stock Hood
Stock Headlights
Brand New Right and Left Fenders
Brand New Rear Bumper
Used Painted Front Bumper
BFG Drag Radials
Stock Suspension
All Interior Pieces
Two 3A Racing Seats w/ 4pt Harnesses
Please enterntain me w/ offer. Lowballers are welcome BUT PLEASE take into consideration of how much the build cost me. I want at least the amount I spent for the build plus a lil more. So hit me up on AIM under Rhdune16 or email me at Rhdune16@gmail.com ...
VIDEO of how the car performs (ONLY AT 10PSI)
http://video.google.com/videoplay?do...80184879&hl=en
http://video.google.com/videoplay?do...53902298&hl=en
PICS of the car...
Thread Starter
Member
Joined: Jul 2004
Posts: 66
Likes: 0
haha i doubt people can afford these rims because everyone has been lowballing... first look for SSR SP1 professors on www.tirerack.com and then make me an offer...
