Alarm arming/disarming beep

Reply Subscribe

Thread Tools

Jul 6, 2006 | 06:38 AM

moe_slimm

Thread Starter

Junior Member

Joined: Jul 2006

Posts: 4

Likes: 0

Alarm arming/disarming beep

Does anyone know if there is an aftermaret alarm that has the beep for arming and disarming like on the Acura's. I have a 95 Accord and no longer like the horn beep alarm system. Maybe I can go to yard and get one off an Acura? Any suggestions?

Jul 6, 2006 | 07:47 AM

totalimmortal

MalleusMaleficarum

Joined: Sep 2005

Posts: 3,668

Likes: 0

From: Asheville, NC

You mean a seperate siren for the arm/disarm chirp??

Jul 6, 2006 | 09:53 AM

moe_slimm

Thread Starter

Junior Member

Joined: Jul 2006

Posts: 4

Likes: 0

Yeah. Its the 1 beep or 2 beep, but different from the alarm

Jul 6, 2006 | 12:41 PM

totalimmortal

MalleusMaleficarum

Joined: Sep 2005

Posts: 3,668

Likes: 0

From: Asheville, NC

I believe it can be added to the factory alarm. You'd have to find which wire it is and test it. It should give either one(armed) or two(disarm) pulsed 12V outputs. If I find I'll let you know.

Jul 6, 2006 | 01:02 PM

totalimmortal

MalleusMaleficarum

Joined: Sep 2005

Posts: 3,668

Likes: 0

From: Asheville, NC

Ok, I looked. I cant find any evidence of said wire. Im leaning towards the possibilty that the factory alarm is/may be tied into the exsisting wiring. If that's the case, your SOL.

Jul 6, 2006 | 02:56 PM

moe_slimm

Thread Starter

Junior Member

Joined: Jul 2006

Posts: 4

Likes: 0

Yeah, I think I found a way to do it on a aftermarket alarm. It'll be nice with a pager and other options too. I plan on doing it maybe next week, so I'll post instructions if anyone else is interested.