Hey, does anyone have an idea of how to install a short rma intake on a 96 civic. I dont know how to remove the stock intake system.

 

Before you get yelled at, I'd do a search h: Asking questions without doing a search first is frowned upon.

 

Step 1: Remove stock intake. It's not rocket science. I'm sure you could figure it out even without instructions or a manual.

Step 2: Install short ram intake.

 

wow

 

Theres a little clamp that holds the hose to the throttle body, undo that with a screw driver. Take the rest of the intake box and remove it, there would be some phillips head screws holding it on. Remove that and the filter and then you have the bottom part. There is going to be a few...........ah what the hell, if you can't figure it out from there you should just take it to a shop and/or buy a Ford Tempo.

 

lol

 

With a short ram, you don't even need to take out your resonator. I didn't. This job would seriously take a first-timer no longer than 20 min. to complete.

 

If i remember correctly all the bolts that hold the stock box in place are pretty easy to see. Just take them all off and pull it out. Everything is pretty straight forward to install, no special tricks or anything.

 

i got it..it took just under 15 mins. It wasnt as difficult as i had expected...now im intrigued as to what other mods i can do myself . Thx for the help

 

I was sort of depressed when I logged on tonight. This was the first and only link I've clicked.

After reading this thread, I feel great! Better than ever! Thanks guys!!!