Notices

from auto to manual, how hard is the labor?

Thread Tools
 
Old Dec 10, 2005 | 12:01 AM
  #1  
anonchild's Avatar
anonchild
Thread Starter
Member
 
Joined: Aug 2005
Posts: 40
Likes: 0
From: Bay Area
Default from auto to manual, how hard is the labor?

is the labor hard?

and also can GSR manual be put in an 2000 GS?
Reply
Old Dec 10, 2005 | 01:54 AM
  #2  
bluetwo's Avatar
bluetwo
Relevance is irrelevant
 
Joined: Jun 2004
Posts: 6,079
Likes: 0
From: Honolulu, HI
Default

I'm pretty sure that it can be done. Hell a person could make the car RWD if they were rich and crazy enough.

But as far as the swap goes I believe it would be pretty damn intensive. It's not just the tranny itself but all the little things you'd have to replace or modify. For example: Gauges, shifter, clutch pedal and mechanisms and clutch master cylinder etc.
Reply
Old Dec 10, 2005 | 08:11 AM
  #3  
Integral's Avatar
Integral
Nightmare Motorsports
 
Joined: Feb 2005
Posts: 437
Likes: 0
From: Florida
Default

There is alot to replace, and it ends up totally about 2000 or so I think... I am still in a mental battle with myself if I want to swap mine over...
Reply
Old Dec 10, 2005 | 08:18 AM
  #4  
sherwood's Avatar
sherwood
I missed Sean
 
Joined: Aug 2004
Posts: 11,285
Likes: 1
From: Fairfield/Bridgeport CT
Default

sell the auto, buy a manual.
Reply
Old Dec 10, 2005 | 08:52 AM
  #5  
Xanax420's Avatar
Xanax420
Diet integra 0 carbs!
 
Joined: Sep 2005
Posts: 12
Likes: 0
From: Jacksonville
Default

I actually had it done with an old civic ex auto. I had a DX tranny put in. The most expensive part is that they have to lift the engine out which anytime that is done it gets pricey... but it was in total 700 clams.

Last edited by Xanax420; Dec 10, 2005 at 08:53 AM. Reason: misspelling
Reply
Old Dec 10, 2005 | 10:09 AM
  #6  
honura's Avatar
honura
Seni
 
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
Default

Originally Posted by Xanax420
I actually had it done with an old civic ex auto. I had a DX tranny put in. The most expensive part is that they have to lift the engine out which anytime that is done it gets pricey... but it was in total 700 clams.

There is no need to lift the motor out.



I have done it 3 times and it's worth it.
Reply




All times are GMT -8. The time now is 09:26 AM.