b16a2 into a 95 civic dx Please Help
Thread Starter
Member
Joined: Nov 2004
Posts: 60
Likes: 0
b16a2 into a 95 civic dx Please Help
i have a b16a2 out of a 99 civic si and im going to put it into a 95 civic dx.
1. heres the big question, can i use the obd 1 distributor off of the 95 civic on the b16a2?
2. what are the differences between obd1 and obd2b?
3. is it better to buy an obd1 b16 ecu or to buy the conversion harness and use the obd2b ecu?
4. if anyone has more advise regarding this swap please feel free to throw it at me.
1. heres the big question, can i use the obd 1 distributor off of the 95 civic on the b16a2?
2. what are the differences between obd1 and obd2b?
3. is it better to buy an obd1 b16 ecu or to buy the conversion harness and use the obd2b ecu?
4. if anyone has more advise regarding this swap please feel free to throw it at me.
Dangerously Advanced
Joined: Jan 2005
Posts: 213
Likes: 0
From: Columbus, Ohio
good-ole-dizz's
teg92 is correct. the housings on the distributors are a different size. i ran into this when swapping my d16 to a b16. i had to gut the d16 dizz for the internals to fit into the b16 dizz. took about an hour, but it got the job done. also, there wasnt a dizz already on the b16?