When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
it looks like hell, damn i did a nasty job on it...im going to stripe it and do it again...no i didnt take pics b/c its uuuuuuuglay. any suggestions on how to do it better?
just make sure the engine is completely cool.. use plenty of coats and leave enough time for each one to dry.. use primer too, i'm sure you already did though
Use vasoline wherever you don't want it to get painted. When you are done you can just wipe it off! I painted the HONDA on the valve cover red that way
I took mine off. Filled holes with newspaper. Scuffed it up a little bit. Used Bond-Aid. Let dry, they spray high temp paint lightly, letting dry and using many coats.
me and purekozcrx did mine.. took it off, cleaned it, masked off the holes, sprayed it, sanded off the "honda" and "vtec" and the "H" and put it back on..
i painted my vavle cover =(
