is water supposed to be here b18b1
Thread Starter
Junior Member
Joined: Mar 2010
Posts: 7
Likes: 0
From: honda land
is water supposed to be here b18b1
was replacing head gasket and seen this is water supposed to be here around the piston cylinder there was water on a few pistons as well and do i need to remove this water thanks in advance
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
Don't remove the coolant around the cylinder bores. The cylinder bores are free-standing on B-series; also known as "open deck." The head gasket and the head provides the seal between the bores and the block.
It would be wise to siphon the coolant off the pistons, however.
Related question... is the engine consuming coolant?
It would be wise to siphon the coolant off the pistons, however.
Related question... is the engine consuming coolant?
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
