Notices
Drag Strip From the staging lanes to the finish line, this is the spot for on-track drag racing discussion.

Saw the most amazing thing at the races

Thread Tools
 
Old Nov 21, 2003 | 06:03 PM
  #1  
Tobra's Avatar
Tobra
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 2,925
Likes: 0
From: Sacramelto, home after 10 years in Texas
Default Saw the most amazing thing at the races

There was this 1 ton Dodge 4X4, snorkle stickin out the hood and a 5 inch pipe stickin straight up behind the snorkle. Stupidest looking vehicle I had seen in a while, but he had a 12.7 dial in, so I thought, hmmm. He lines up against some late model camaro, gets the light and throws a 12.1:jawdrop: Second fastest car driven there, behind the Z06 vette on the bottle at 11.9. Went with my buddy in his 455 olds, he was runnin14.925, 14.950and 15.005 on a 14.9 dial in, not bad. Saw a NSX run low 12's, and an ITR run a 14.2. Had fun, will have to take the teg next time:naughty:
Reply
Old Nov 21, 2003 | 08:18 PM
  #2  
Legend_master's Avatar
Legend_master
Never fast enough member
 
Joined: Nov 2002
Posts: 560
Likes: 0
From: Arlington, TEXAS
Default

how did it sound?
Reply
Old Nov 22, 2003 | 01:16 PM
  #3  
Rezza's Avatar
Rezza
Tell your mom I said hi!
 
Joined: Oct 2003
Posts: 2,096
Likes: 0
From: Greensboro, NC / Long Island, NY
Default

have any idea of what year is was???
Reply
Old Nov 23, 2003 | 07:15 PM
  #4  
90TGP's Avatar
90TGP
Senior Member
 
Joined: Jun 2002
Posts: 301
Likes: 0
From: Ohio
Default

Probably was a modded turbo diesel.
Reply
Old Nov 23, 2003 | 07:24 PM
  #5  
Kai's Avatar
Kai
Rotorphile.
 
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
Default

Diesel? Fast? :chuckles:
Reply
Old Nov 24, 2003 | 07:31 AM
  #6  
fjm1's Avatar
fjm1
G35
 
Joined: Oct 2003
Posts: 699
Likes: 0
From: NW NJ
Default

Originally posted by Kai
Diesel? Fast? :chuckles:
Yep. Inline-six 5.9-liter High-Output Cummins Turbo Diesel engine, which delivers 305 horsepower at 2900 rpm and 555 lb-ft of torque at only 1400 rpm.

Modifications can yield an estimated 1,000 lb-ft of torque.
Reply
Old Nov 24, 2003 | 08:05 AM
  #7  
FMOS Racing's Avatar
FMOS Racing
Still Plays With Trucks
 
Joined: Aug 2002
Posts: 74
Likes: 0
From: Indianapolis, IN
Default

Which track?

I haven't seen any fast turbo diesels at Sac, but I was at Sears one night and kinda chuckled at this guy in a jacked up extended cab 4x4 Dodge spooling it up at the line and blowing black smoke all over creation... but I stopped snickering really fast when he launched! I couldn't believe something so big would come out of the hole so fast. He went on to run a 12.70.

I talked to the guy afterwards and he said he launches in 4WD and slaps the transfer case offline when he shifts to second. He said it's really inconsistent but makes for a helluva launch when he gets it right. I'll say!!
Reply
Old Dec 17, 2003 | 08:57 PM
  #8  
Tobra's Avatar
Tobra
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 2,925
Likes: 0
From: Sacramelto, home after 10 years in Texas
Default

Originally posted by Legend_master
how did it sound?
Like a Mack truck on mehamphetamines with a 5 inch pipe boltd to the exhaust manifold. I saw the smoke and heard the roar about 30 minutes before I actually saw it. Was at Sacto Raceway, Wednesday closest to my original post. I would think a turbo vehicle with that little resistance on the exhaust would make a lot more power. I imagine it would be a pretty scary ride too, I would take 12's in an NSX over a 4X4 every time. There was a Ford doing 13's too, just as loud
Reply
Old Dec 17, 2003 | 10:18 PM
  #9  
RB's Avatar
RB
snitches get stitches
 
Joined: May 2002
Posts: 49,696
Likes: 1
From: Portland, OR
Default

reminds me of this F350 run that ran an 11.42 in the 1/4 mile...amazing.


right click, save as...please.
Reply
Old Dec 29, 2003 | 07:55 PM
  #10  
uclaccord's Avatar
uclaccord
Senior Member
 
Joined: Jun 2003
Posts: 831
Likes: 0
Default

Originally posted by fjm1
Yep. Inline-six 5.9-liter High-Output Cummins Turbo Diesel engine, which delivers 305 horsepower at 2900 rpm and 555 lb-ft of torque at only 1400 rpm.

Modifications can yield an estimated 1,000 lb-ft of torque.
thas some frickin mad torque...stock or modded...wow
Reply



All times are GMT -8. The time now is 05:51 PM.