Notices

Fuel injectors?

Thread Tools
 
Old Jul 19, 2002 | 05:30 PM
  #1  
Black2KGSR's Avatar
Black2KGSR
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 21,463
Likes: 0
From: Charlotte, NC
Default Fuel injectors?

What kind of injectors should be used on a '95 LS turbo?
my cousin is trying to find some. what's a good brand?
Reply
Old Jul 19, 2002 | 05:35 PM
  #2  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

i hear RC is a good brand. they sell new injectors as well as clean up your stock ones. www.rceng.com
Reply
Old Jul 19, 2002 | 05:52 PM
  #3  
Black2KGSR's Avatar
Black2KGSR
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 21,463
Likes: 0
From: Charlotte, NC
Default

is there any performance car that I can take the injectors from and make them work in an LS?
Reply
Old Jul 20, 2002 | 02:57 PM
  #4  
Etylorcen's Avatar
Etylorcen
Turbo Mafia Soldier
 
Joined: May 2002
Posts: 316
Likes: 0
From: San Diego
Default

If you want a cheap solution get some DSM 450cc injectors. Get them cleaned and blueprinted. You'll need to hook up a resistor box though. The resistor box goes for like 10 and the injectors you can get for around 50 if you're lucky. http://www.cruzinperformance.com/fuelinj.html Go here to get em cleaned. Cheap and effective. :thumbup: Unless you're trying to get some crazy numbers you'll be good w/ 450cc.
Edit: FYI you will need some sort of fuel management to get them to run...s-afc, hondata, aem ems...etc
Reply
Old Jul 20, 2002 | 03:03 PM
  #5  
TheRooster's Avatar
TheRooster
Former Senior Member
 
Joined: May 2002
Posts: 391
Likes: 0
From: Oakland
Default

I've heard people have better results with Bosch injectors over the Nippon Denso's. There's also plate vs. pintle types. You might do a search or email/phone a company that sells both and ask them what their opinion is. If their tech guy has any knowledge, he'll usually be able to help you out.
Reply
Old Jul 21, 2002 | 06:11 AM
  #6  
DrugTeg's Avatar
DrugTeg
Senior Member
 
Joined: Jun 2002
Posts: 205
Likes: 0
From: Pittsburgh
Default

you can take them from a v-tech lude..or DSM..i woudl go with DSM myself..i have them in my teg with the drag kit and hondata
Reply
Old Jul 21, 2002 | 02:06 PM
  #7  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

Originally posted by DrugTeg
v-tech
you have a teg and dont know how to spell vtec? :nono:
Reply
Old Jul 21, 2002 | 02:19 PM
  #8  
kris79's Avatar
kris79
Owner of CEmotorsports
 
Joined: Jul 2002
Posts: 225
Likes: 0
Default

rc are a really good brand, i have a set of 310 those are the ones rc told me to get cause i have a drag turbo kit, but i think i want to up it to 440 or something like that.
Reply
Old Jul 23, 2002 | 05:37 PM
  #9  
Black2KGSR's Avatar
Black2KGSR
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 21,463
Likes: 0
From: Charlotte, NC
Default

Originally posted by Etylorcen
If you want a cheap solution get some DSM 450cc injectors. Get them cleaned and blueprinted. You'll need to hook up a resistor box though. The resistor box goes for like 10 and the injectors you can get for around 50 if you're lucky. http://www.cruzinperformance.com/fuelinj.html Go here to get em cleaned. Cheap and effective. :thumbup: Unless you're trying to get some crazy numbers you'll be good w/ 450cc.
Edit: FYI you will need some sort of fuel management to get them to run...s-afc, hondata, aem ems...etc
do you know any websites with instructions on how to install them?
Reply
Old Jul 23, 2002 | 05:49 PM
  #10  
Black2KGSR's Avatar
Black2KGSR
Thread Starter
Senior Member
 
Joined: Mar 2002
Posts: 21,463
Likes: 0
From: Charlotte, NC
Default

also...does it matter which generation Eclipse/Talon I get them off of?
there are some from a '91 Eclispe Turbo...and some from a '98 Eclipse Turbo. all are 450cc according to the seller.

'98 Eclipse

'91 Eclipse
Reply



All times are GMT -8. The time now is 06:50 PM.