change in plan
sorry...lol i dont know very much about the honda engine. just tell me what i can do with 12,000$ and want something that wont blow up on me....what would you suggest? i want to run a 10 second car...less if i can accomplish it
Last edited by jeff_falk2007; Jan 1, 2008 at 04:28 PM.
Here is a basic rundown of what you will need:
Light chassis
B,H,K series motor
Iron Sleeves
Low compression pistons (9:1)
Forged rods
Valves, valvesprings, and retainers
Turbo capable of 500+ whp
1600 cc injectors
Engine management
If you don't cheap out on parts and build it properly, it will last a good while.
Light chassis
B,H,K series motor
Iron Sleeves
Low compression pistons (9:1)
Forged rods
Valves, valvesprings, and retainers
Turbo capable of 500+ whp
1600 cc injectors
Engine management
If you don't cheap out on parts and build it properly, it will last a good while.
my car is a 1994 integra ls 4 door....and has the B18B1 engine...and am currently looking for a MT....i need a suggestion on a Manual Trans and where to get one. Should i upgrade to vtec? are there any tutorials to successfully install and run a turbo if so then where can i get one? where are tuning shops around the ohio region? should i change my stock ecu? the help is appreciated.
Last edited by jeff_falk2007; Jan 3, 2008 at 11:19 PM.
You are going to need a lot of power to haul that pig of a chassis into the 10's. You want a short geared tranny but not so short geared that you have to shift into 5th before the end of the race. A GSR tranny should be perfect. Converting to vtec will help reach your goal a lot easier.
You are going to have to google the answers to the rest of your questions. If you want a car in the 10's, you would certainly be more proactive on finding information.
You are going to have to google the answers to the rest of your questions. If you want a car in the 10's, you would certainly be more proactive on finding information.


