Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

New to this!!!!!

Thread Tools
 
Old Jan 24, 2006 | 04:30 PM
  #1  
pghprettie_boi's Avatar
pghprettie_boi
Thread Starter
Member
 
Joined: Jan 2006
Posts: 81
Likes: 0
Default New to this!!!!!

I was searching the net and I came across this site that sells engines. Which one of these engines would be a good swap for my 92 honda civic lx
.

This is a 92-95 D15B SOHC
Included Features:
AC
Alternator
Distributor
Intake Manifold
Motor
Power Steering Pump
Transmission

Engine: B16A I: DOHC VTEC- Long Block


Transmission:
Year: 88-91
Displacement:
Compression Ratio:
Valve Train: 16V
Horsepower: 160hp


Would these two fit?
Reply
Old Jan 24, 2006 | 05:00 PM
  #2  
teg92's Avatar
teg92
WHAT OK YEAH!
 
Joined: Sep 2003
Posts: 5,565
Likes: 0
From: overthere
Default

depends on what you want to spend, and what you plan on doing with it
Reply
Old Jan 24, 2006 | 05:09 PM
  #3  
pghprettie_boi's Avatar
pghprettie_boi
Thread Starter
Member
 
Joined: Jan 2006
Posts: 81
Likes: 0
Default

I know the price 600 for the top 650 for the bottom. I just want to swap out my old eng and maybe make it a little faster. Whould I need to buy different hardware? Would the long block fit in my car?
Reply
Old Jan 24, 2006 | 05:24 PM
  #4  
97civicEXVTEC's Avatar
97civicEXVTEC
Senior Member
 
Joined: Jul 2005
Posts: 2,257
Likes: 0
From: topton,pa
Default

if you dont want any huge gains just go with the d15b. its enough pull for most.
Reply
Old Jan 24, 2006 | 05:36 PM
  #5  
b16ahybrid's Avatar
b16ahybrid
Senior Member
 
Joined: Dec 2004
Posts: 672
Likes: 0
Default

Originally Posted by pghprettie_boi
I was searching the net and I came across this site that sells engines. Which one of these engines would be a good swap for my 92 honda civic lx
.

This is a 92-95 D15B SOHC
Included Features:
AC
Alternator
Distributor
Intake Manifold
Motor
Power Steering Pump
Transmission

Engine: B16A I: DOHC VTEC- Long Block


Transmission:
Year: 88-91
Displacement:
Compression Ratio:
Valve Train: 16V
Horsepower: 160hp


Would these two fit?

First motor will drop rite in no problems....the second motor is pre-obd and you would have to change to a hydrolic tranny obd-1 distributor,injectors,etc........not to mention in some stated that engine isn't legal to put in your car....it has to be from the same year or newer then your vehicle..that engine is from 88-91...
Reply
Old Jan 24, 2006 | 05:49 PM
  #6  
pghprettie_boi's Avatar
pghprettie_boi
Thread Starter
Member
 
Joined: Jan 2006
Posts: 81
Likes: 0
Default

Sorry, The second Pic is wrong here it is

Transmission:
Year: 90-94
Displacement:
Compression Ratio:
Valve Train: 16
Horsepower:
Torque:
Redline:
Price: $650.00 USD | $750.00 CAD




Included Features: AC
Alternator
Distributor
Intake Manifold
Motor
Power Steering Pump
Transmission

OR would it be Way Cheaper To jus rebuid my oringinal one?
Reply




All times are GMT -8. The time now is 12:01 PM.