Aem Ems
 

Hey guys, I am thinking about buying the AEM EMs system. I have a turbo on my car right now. it is set to 8PSI, and what I would like to do is be able to run a seperate fuel map so that on the highway I can switch it over so that when I don't need it, I can have the turbo do relatively nothing, and have the air fuel mixture change so that the injectors aren't flowing too much gas into the engine...
what would be the best way to accomplish this?

thanks, Toda

uhh on the highway at part throttle the turbo is doing nothing your boost gauge should be well into vaccum on part throttle.

but yes part throttle and full throttle maps are different and change automaticly