what kind of plugs and wires?
I also use Magnacore wires - 10mm. They don't fit so well under the wire cover cause they come straight out rather than at a 90 deg. angle, but they're great wires. OEM are good too. I'd either go OEM, NGK, or Magnacore on the wires. I also run NGK plugs.
The plugs you should use are the same model as in all of the non-VTEC B-Series, F-Series (ALL), J-Series, and D-Series from 92-2000 (except for the 92-95 VTEC, which was ZFR5J-11).
NGK:
Copper - ZFR5F-11, 30K Miles (my first choice, inexpensive and relatively long life)
Platinum - PZFR5F-11, 60K
Iridium - ZFR5FIX-11, 60+ (105?) (second choice, longer life, and less $ than plat)
Denso:
Copper - KJ16CR11, 30K Miles
Platinum -
Iridium -
I can't seem to find the other two denso numbers, so if somebody has them, just post so I can update this post.
NGK, Sumitomo (OE), or Magnecore wires. No others. And unlike all of the other brands, these don't really wear out. So-tune ups don't invlolve wire replacement.
NGK:
Copper - ZFR5F-11, 30K Miles (my first choice, inexpensive and relatively long life)
Platinum - PZFR5F-11, 60K
Iridium - ZFR5FIX-11, 60+ (105?) (second choice, longer life, and less $ than plat)
Denso:
Copper - KJ16CR11, 30K Miles
Platinum -
Iridium -
I can't seem to find the other two denso numbers, so if somebody has them, just post so I can update this post.
NGK, Sumitomo (OE), or Magnecore wires. No others. And unlike all of the other brands, these don't really wear out. So-tune ups don't invlolve wire replacement.
Magnacore is the shizzle dizzle!!! I am very impressed with my new Magnacore 10mm's! Am running Denso Iridium plugs.
Got a sweet deal on the Denso's....the foriegn gal working the register at Auto Zone goofed up and charged me $2.49 per plug! Rare mistake in my favor...I'll take it!
Got a sweet deal on the Denso's....the foriegn gal working the register at Auto Zone goofed up and charged me $2.49 per plug! Rare mistake in my favor...I'll take it!


