New best 1/4 mile time at NOPI in Ennis
I went the the NOPI finals in Ennis and ran a new best time. I have a 1993 Civic Si hatch weighing about 2500 lbs with me in it. Here's the time:
R/T: .664 (first time using a pro tree) 60': 1.817 330: 5.077 1/8: 7.685 MPH: 97.12 1000: 9.913 1/4: 11.757 MPH: 123.29 This was on 205/50 15 BFG drag radials, full interior (minus spare tire), and 93 octane pump gas. I drive this car everyday and have had it with this setup daily driven for over a year. Here's the set-up: Engine -1995 B18C1 motor bored to 83.5mm -RS Machine sleeves -Arias 83.5mm 9.5:1 thermal coated pistons with .866 wristpins -Crower rods -Balanced and micro polished crank -ARP head studs - Cometic 3mm head gasket -Skunk2 titanium valve springs -Skunk2 titanium retainers -Rev stainless steel valves Performance -Skunk2 intake manifold -Full-Race stainless steel equal length turbo manifold -Full-Race stainless steel 3 inch down pipe with v-band -Precision SC61 turbo with ceramic coated exhaust housing -Custom stainless steel 3 inch exhaust dumped under the car with two 3 inch stainless steel Top Speed resonators -38mm Tial waste gate -Custom stainless steel waste gate dump tube -XS Engineering 24x11x3 air to air intercooler -Blitz blow-off valve -GReddy oil catch can -C&R aluminum radiator with slim fan -MSD digital 6 ignition with external coil (has a 2-step rev limiter) -ACT extreme pressure plate -Competition Clutch 4-puck disc with sprung hub -JDM GS-R transmission with factory limited slip differential Engine and Fuel Management -Hondata S200 with boost -Precision 780cc injectors -AEM fuel rail -Walboro/BBK 255lph in tank fuel pump For suspension I have Tein Type Flex and a camber kit all around. I'm making about 430 whp on high boost. I launch on 0.8 bar and hit the high boost (1.2 bar) as soon as I shift into 2nd gear. |
thats sweet man!! congrats!! i wish i could get my civic goin that fast...im doing the b18c swap next month..so thats a step in the right direction!
|
very nice man......how bout some pics of the car? (in appearance section of course :D )
|
thats a remarkable 60' considering the weight and tires. Good stuff.
|
Post them pics here, I wanna see it! Nice work man. :)
|
what did you think of jim hucks runs.....congrats on the 11.7's
|
Originally Posted by BoostedITR41
what did you think of jim hucks runs.....congrats on the 11.7's
|
Originally Posted by ImportRacer
I think it was amazing. To see a CRX run 11.01 on street tires is crazy. Especially since he's running a straight B20 with an LS tranny.
|
All times are GMT -8. The time now is 01:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands