Honda Accord 98-02: Grillcraft Sport Grille (Lower)
 

http://www.importstreetscenes.com/banner.gif
Import Street Scenes - News, photos, videos and info .. straight from the streets!
http://www.importstreetscenes.com

Thanks www.accordracing.com for the DIY :)
---------------------

http://accordracing.com/how-tos/gril...tall_58_02.jpg

- This is the Project Accord before installation

http://accordracing.com/how-tos/gril...tall_58_03.jpg

- Remove upper grille clips using a flathead screwdriver

http://accordracing.com/how-tos/gril...tall_58_04.jpg

- Remove lower bumper clips using a flathead screwdriver.

http://accordracing.com/how-tos/gril...tall_58_05.jpg

- Remove the bolts located in right & left upper fender well corner

http://accordracing.com/how-tos/gril...tall_58_06.jpg

- Remove the bolts located in right & left lower fender well corner.

http://accordracing.com/how-tos/gril...tall_58_07.jpg

- The bumper cover can now be removed from the vehicle.

http://accordracing.com/how-tos/gril...tall_58_08.jpg

- Place the GrillCraft Grille into bumper opening and align grille pin with bumper center (note the vertical support)

http://accordracing.com/how-tos/gril...tall_58_09.jpg

- Using a 3/16-drill bit drill center mounting pinhole.

http://accordracing.com/how-tos/gril...tall_58_10.jpg

- While holding the grille firmly in place mark the mounting tab screw location using a sharp scribe.

http://accordracing.com/how-tos/gril...tall_58_11.jpg

- Using a 3/16-drill bit, drill bracket mounting screw holes.

http://accordracing.com/how-tos/gril...tall_58_12.jpg

- Install the supplied “U” nuts onto the grille mounting tabs as shown.

http://accordracing.com/how-tos/gril...tall_58_13.jpg

- Fasten the grille screws from the backside.

http://accordracing.com/how-tos/gril...tall_58_14.jpg

- Wow what a difference.

http://accordracing.com/how-tos/gril...tall_58_15.jpg

http://accordracing.com/how-tos/gril...tall_58_16.jpg

- Shown here with the optional upper grille kit