Proper Washing & Drying How-To
Washing and Drying can be the most overlooked process during a detail, however, in reality is one of the most important steps during a detail. You may be asking yourself how washing and drying can be so important. The reason is because many of the imperfections in your paint (scratches, swirl marks, water spots, etc.) are caused due to improper washing and drying techniques. Our goal is to teach you the proper techniques to help minimize creating more imperfections in your paint.
Recommended Products:
A good lubricating shampoo is key when trying to remove contamination. Without proper lubrication you would be pushing dirt, pollen, tar, etc. across your paint and causing many imperfections in your clear coat. Properly lubricated shampoos will help lift contamination from the surface, making them easy for removal. A quality shampoo should also have the proper conditioners for your paint unlike the common enemy of dish soap. We know many of you have it hammered into your head that you need to wash with a dish soap, such as Dawn, to remove previous layers of wax to start with a fresh surface. Well there are downsides to washing with dish soap over time, such as it can dry out your paint, dry out and discolor plastic, vinyl and rubber trim, and is harmful to your clear coat. There are better methods to strip the previous layers of sealant or wax that are beneficial to your paints surface, such as polishing your paint. Also, when maintaining your vehicle and do not plan on re-waxing, quality shampoos will leave as much protection on your paint as possible. Investing in high quality drying towels will not only save you time during the drying process but it will also be safe for your clear coat as well minimizing the chance of adding swirls. Our towel of choice is a Waffle Weave Microfiber Towel. This design has a small nap to pull contamination away from the surface as well as absorb water like a sponge. In many cases, you will only need one of these 25” x 32” towels to dry your entire vehicle assuming you follow our helpful tips and techniques (which will be explained in just a moment) during the drying process. It is the safest product we have tested to minimize adding swirls to your clear coat. Two 5 gallon wash buckets is a must for any wash day. The reasoning will be described in further detail as we get into the how-to part of the tutorial, but one will be filled with water and suds and the second one with just water. Water supply and hose is pretty obvious but should not be over looked. Flooding the surface of your vehicle is the best thing for minimizing the chance of adding imperfections to your paint so plenty of water will be necessary for pre-wash, rinse and final sheet drying. Bug and tar degreaser is a nice product to have around when you happen to run into stubborn bits of contamination that need to be pre-treated prior to the wash. The most common things this will be used on is tar, bug splatter and rail dust. Usually this product will be used on the lower panels, behind wheels, and the front and rear bumpers. Using a bug and tar block can also help aid in the removal of stubborn contamination and save you some time. Now that we have explained the products you need let us proceed onto the process. How To: Let us start by addressing prior to actually washing the vehicle. First, find an area to work in with plenty of shade. With the sun beating on hot soapy water, it can cause water etching and spots on your vehicles paint. This will add more time in your routine removing them especially if you are just washing and drying for maintenance and not planning on doing a full routine. The paint and wheels should be cool to the touch prior to washing. Next step, take a look at your attire, no jeans, no belts, no buttons, no rivets and no jewelry. You may ask why, but the reasoning is pretty simple, they all will easily scratch your paints surface even with very minimal pressure. Also at this time ensure that all windows are completely up and doors, hood and trunk are completely closed. Prep Stage:
The next logical step in the complete detailing process is Clay Baring your vehicle to ideally prep your paint for either polishing, glazing, sealing and waxing. Washing and Drying is the foundation of any detail so you may proceed to any step next. [Format changes - Nelson - 4/29] |
WOW! now thats a write up!
|
I never thought about "rinsing" the water off. That is clever.
I use a third terry cloth sponge for the vinyl convertible top. Since it is lighter than my car's paint it shows dirt easily, and it also collects weird things I don't care to grind into my paint. |
I really appreciate this write-up. I've been making use of it for about half a dozen washes now on my IS and notice a difference in the fine scratches on the car. The sheeting of the water to rinse is also very effective and substantially cuts down on drying time. Thanks much! :)
|
How about some tips on polishing?
|
awesome...nice tips...it would help a lot of people...thanks for sharing such a useful info...
|
Ohhh great post.
Good effort you write the whole method of washing a car with the beneficial tips for washing. I think there is not a post before this which i like this detailed. Please post some tips for cleaning the rims because I found it the most difficult part of washing a car. Because when the mud is stuck insides the wheel and rims then it makes trouble in washing. So please post something for that. |
A good effort to write the whole of washing a car useful tips for washing. In my opinion, it is not an extension before that I love the detail.
|
All times are GMT -8. The time now is 09:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands