Z6 into 90crx?(EF?)
#1
Member
Thread Starter
Join Date: Jan 2009
Location: polk co. wi
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Z6 into 90crx?(EF?)
Hey all, new to site
Detail's.....90 CRX Si, stock dohc ZC
gonna ditch the zc and looking to rebuild and then drop in either the Z6, or the A1
Question? is the Z6, or A1 gonna be a direct bolt in, or is mounting fabrication gonna have 2take place?
much thanx
Detail's.....90 CRX Si, stock dohc ZC
gonna ditch the zc and looking to rebuild and then drop in either the Z6, or the A1
Question? is the Z6, or A1 gonna be a direct bolt in, or is mounting fabrication gonna have 2take place?
much thanx
#3
Member
Thread Starter
Join Date: Jan 2009
Location: polk co. wi
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
huh, ya no a1 in that case , what about the z6 tho? otherwise im prolly gonna find an A6 an rebuild for turbo
Last edited by Neubie; 01-09-2009 at 12:12 PM. Reason: ................reasons
#5
Member
Thread Starter
Join Date: Jan 2009
Location: polk co. wi
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
the z6 is found in the 92-95 civic's, and 93-95 del sol's, I'm interested in this one cuz it's v-tec, and heard this motor has potential, but am concerned about mounting fab.
Other option is the a6, which is what i'm starting to lean towards, just cuz it'll be a direct bolt in, parts and rebuild kit's are readily access-able, that and project car tuner #7(?) has nice diy turbo write up
This is gonna be the be my first rebuild, first engine pull and re-install, so realistically, i'm not looking for a huge hp gain, well that's a lie i guess!!!
oh ya, and ya solo cam!!!! YAY!